E-Flite Power 160 Brushless Outrunner Motor, 245Kv

Features

Equivalent to or exceeding the power of a 160-size, 2-stroke, glow engine for 12–20 lb (5.4–9 kg) planes
Ideal for 3D planes as much as 15 lb (6.8 kg)
High-torque alternative to inrunner brushless motors
Includes install and mounting hardware
External rotor style for better cooling
High-quality building and construction with ball bearings and solidified 8mm steel shaft
Includes 2 12mm prop shaft adapters tapped out for 10–32 threads
Ideal for designs requiring as much as 2700 watts of power
Slotted 14-pole outrunner style

Overview

The Power 160 is created to deliver clean and quiet power equivalent to or exceeding the power of a 160-size 2-stroke glow engine for sport and scale planes weighing 12 to 20 pounds (5.4 to 9 kg), 3D planes as much as 15 pounds (6.8 kg), or designs requiring as much as 2700 watts of power.
It supplies excellent power for the popular 27% scale aerobatic designs such as the Hangar 9 Additional 260, scale efficiency for the Hangar 9 P-47D Thunderbolt 150 ARF, and extreme efficiency for designs like the well-known Ultra Stick Lite.



Maximum running temperature: 220 degrees Fahrenheit.

Adequate cooling is needed for all motor operation at optimal present levels.

Maximum burst present period is 15 seconds. Adequate time between maximum burst periods is required.

You will need...
75A-110A HV brushless ESC
NINE–10S Li-Po or 28- to 32-cell Ni-MH/Ni-Cd
18x8 to 20x10 prop

Specifications

Type: Brushless outrunner
Size: Equivalent to or exceeding the power of a 160-size 2-stroke glow engine
Bearings or Bushings: One 8 x 19 x 6mm Bearing, and Two 8 x 16 x 5 Bearings
Wire Gauge: 13
Recommended Prop Variety: 18x8 to 20x10
Voltage: 33.3–38.4
RPM/Volt (Kv): 245
Resistance (Ri): .03 ohms
Idle Present (Io): 1.45A @ 10V
Continuous Present: 60A
Optimum Burst Current: 78A (15 sec)
Cells: 28–32 Ni-MH/Ni-Cd or NINE–10S Li-Po
Speed Control: 75–110A High Voltage Brushless
Weight: 650 g (23.0 oz)
General Diameter: 63mm (2.50 in)
Shaft Diameter: 8mm (.30 in) (Includes 2 12mm threaded prop shaft adapters with 1.5 pitch)
General Length: 64mm (2.50 in)