E-Flite Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft

Functions

Perfect for designs requiringing} as much as 120 watts of power
Optimized windings for 3D efficiency
High-torque, direct-drive alternative to inrunner brushless motors
Consists of mount, prop adapters and mounting hardware
4mm hollow shaft is easily reversed for alternative motor setups
Outstanding motor for little 3D airplanes 7–14 oz (200–400 g)
Incredibly light-weight—just 1.6 ounces
Perfect for variable pitch props such as the E-flite® Showstopper Variable Pitch Prop System
External rotor design for better cooling
Premium construction with ball bearings

Summary

E-flite’s most current Park 370 is a brushless outrunner motor that includes a 4mm hollow shaft, ideal for {use|usage} with variable pitch propellers. It’s perfectly designed for electric designs geared up with variable-pitch propeller systems, such as the E-flite® ShowStopper VPP system. However, you don’t need a VPP to use this motor—it’s an outstanding motor for little 3D airplanes that weigh 7–14 ounces. A motor mount, prop adapter and all hardware are included.
 



Maximum running temperature: 220 degrees Fahrenheit.

Adequate cooling is needed for all motor operation at maximum existing levels.

Maximum burst existing duration is 15 seconds. Adequate time in between maximum burst intervals is required.

You will require...
12–20A brushless ESC
2–THREE Li-Po or 6–10 Ni-Cd/Ni-MH
8x3.8–10x4.7 Slow Flyer Prop
Variable Pitch Prop alternative

Specifications

Type: Brushless outrunner
Size: Park 370
Bearings or Bushings: One 4 x 8 x 4mm Bearing, and One 4 x 9 x 4mm Bearing
Recommended Prop Variety: 8x3.8–10x4.7 or Variable Pitch systems
Voltage: 7.2–12V
RPM/Volt (Kv): 1200
Resistance (Ri): .18 ohms
Idle Existing|Present|Existing} (Io): .60A
Continuous Current: 10A
Maximum Burst Current: 12A (15 sec)
Cells: 6–10 Ni-MH/Ni-Cd or 2–THREE Li-Po
Speed Control: 12–20A Brushless
Weight: 45 g (1.6 oz)
Overall Size: 28mm (1.10 in)
Shaft Size: 4mm (.16 in) hollow
Overall Length: 25mm (1.00 in)