E-Flite Park 180 Brushless Outrunner Motor, 2200Kv

Suitable for 3D designs 2–3 oz (55–85 g) and sport and scale designs 3–6 oz (85???170 g) or designs needing approximately 30 watts of power.

Features
Suitable for 3D designs weighing 2–3 oz (55–85 g) and sport and scale designs weighing 3–6 oz (85–170 g)
Suitable for indoor and outdoor little aerobatic park leaflets
Extremely peaceful and lightweight—simply .3 oz (8.5 g)
High-torque, direct-drive option to inrunner brushless motors
Designed for firewall program install or carbon tube install
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
Approximately 30 watts
Includes prop adapter
Includes install, installing hardware and 2mm gold BL adapters
Updated efficiency for indoor motors
High-quality construction with ball bearings and solidified steel shaft

Had to Complete
4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH

3x3 Direct Drive Prop

Specs
Application: Airplane
Bearings or Bushings: Two 1.5 x 4 x 2mm Bearings
Cells: 2–3S Li-Po or 4–8 Ni-Cd/Ni-MH
Constant Existing: 0 - 10A
Idle Existing (Io): .30A @ 8V
Maximum Burst Current: 3.2A (15 sec)
Motor Style: Outrunner
Total Diameter: 16mm (.63 in)
Total Length: 20mm (.80 in)
Power Plant Size : 180-280 Electric
RPM/Volt (Kv): 2200
Recommended Prop Variety: 3x3 to 6x3 'Direct Drive' for TWO or 4x4 or 4.5x3 for 3S
Resistance (Ri): .91 ohms
Shaft Diameter: 1.5mm
Size: 180
Speed Control: 4–6A brushless
Type: Brushless outrunner
Voltage: 4.8–11.4V
Weight: 8.5 g (.30 oz)

Frequently gotten with the product that you are currently reading about.



Designed for usage with 3 wire Brushless motor systems, this is
    the 2mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
3 male bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .59" (15mm)
Diameter: .079" (2mm) outside

COMMENTS:
For the 2mm female port order GPMM3111