E-Flite Carbon-Z Cub SS 2.1m BNF Basic with AS3X and SAFE Select

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The original Carbon-Z® Cub was ground-breaking and created a new category for large-scale, electric-powered models. Based on a platform that was understood for famous versatility, its lightweight and remarkably strong, composite-reinforced and hollow-core style was mostly factory-finished and assembled so it was much easier for more pilots to go "BIG" than ever before. The E-flite® Carbon-Z Cub SS 2.1m is an upgraded and improved version of the original, geared up with a long list of new features for improved flight efficiency, abilities and convenience so you can delight in a giant-scale flying experience unlike any other.





Features

An updated and improved version of the ground-breaking and category-creating original Carbon-Z Cub

Giant-scale 84"/2.1m wingspan with lightweight and remarkably strong composite-reinforced, hollow-core Carbon-Z building and construction

Drooped wing tip style increases wing and aileron location for considerably improved slow speed efficiency and control

Thumbscrews with decorative gas caps and snap-on antennas to quickly install/remove the two-piece wing without tools

Modified flap style enables them to travel both ways for full-span aileron and other mixing options

Articulated and shock-absorbing landing equipment with improved and reinforced mounts

Even bigger oversized, tundra-style wheels with softer tires for much better ground handling

Fully-molded leading and bottom landing equipment covers for a more scale-like appearance

More secure rear mount and cross braces for the optional floats (sold independently)

Quick-release, multi-position battery installing tray (inspired by Morgan Mill RC) fits 4–6S 3200–7000mAh batteries

Improved motor style with included bearing for smoother, more reputable efficiency

15x7 propeller formed from product that much better preserves balance and stiffness

IC5 connector (suitable with EC5 ports) on the 60-amp ESC for much better and more reputable power shipment

Lively, high-visibility Carbon Cub SS Signature trim and color scheme

Spektrum™ AR637TA 6-Channel AS3X & SAFE Telemetry Receiver

Easy to fly with ingenious, optional-use SAFE® Select flight envelope protection

The unequaled stability and locked-in feel of unique AS3X® technology

Six factory-installed digital, metal-geared servos with ball-link equipped linkages

Hassle-free push-button released, top-mounted hatch for simple battery access

Exceptionally broad scale and moderate to beyond-scale aerobatic and wild flight envelope

Pull up to 3-meter span sailplanes with the consisted of aerotow system (servo sold independently)





Overview
The E-flite® Carbon-Z® Cub SS 2.1m makes it much easier than ever to delight in a genuinely unique and flexible giant-scale flying experience. Based on the original Carbon-Z Cub, it's geared up with an abundance of new convenience, capability and flight performance-improving features. An updated wing style with drooped pointers includes wing and aileron location for considerably improved slow speed handling, efficiency and control. The modified flap style enables them to travel both ways for full-span aileron and other mixing options, and thumbscrews make it much easier to set up and remove the two-piece wing without tools.
Articulated and shock-absorbing landing equipment, geared up with even bigger oversized tundra-style wheels with softer tires, provides much better ground handling that absorbs the bumps of rough surfaces. The push-button released, top-mounted hatch provides practical and simple access to the battery compartment – which now holds a quick-release, multi-position battery installing tray that fits 4S to 6S 3200–7000mAh batteries. An enhanced motor style including an additional bearing, plus a propeller formed from product that much better preserves balance and stiffness, leads to smoother and more reputable power system efficiency. The composite-reinforced, hollow-core airframe gets here mostly factory-finished and assembled, and the installed digital, metal-geared servos with ball-link equipped linkages deliver crisp and accurate control.
So whether you fly it slow and scale, or carry out beyond-scale vertical departures and aerobatics, the Carbon-Z Cub SS will provide unexpected levels of versatility, capability and efficiency you'll delight in flight after flight!





 






More Capability
The Carbon-Z Cub SS features an upgraded wing style with drooped pointers that includes wing and aileron location for much better slow speed handling, efficiency and control – similar to the Airplane Booster Wing Tip Set CubCrafters deals for lots of Cub models. Plus the modified flap style enables them to travel both ways for full-span aileron and other mixing abilities.
 



More Convenience
Even with its giant-scale 84"/2.1m wingspan, the Carbon-Z Cub SS is simple to shop and transport since of the two-piece wing. And now it's more convenient than ever since no tools are needed for field assembly/disassembly with the new thumbscrews. There are even decorative gas caps and antennas that snap onto the thumbscrews for included scale detail.

 







More Capable Gear
The new articulated and shock-absorbing landing equipment, which is geared up with even bigger oversized tundra-style wheels with softer tires, provides much better ground handling that quickly absorbs the bumps of rough surfaces. An enhanced installing style for the main equipment makes it stronger than before, and fully-molded leading and bottom landing equipment covers deliver a more scale-like appearance.
 



More Gear Options
An optional float set (sold independently) that consists of a servo and practical water rudder, plus a new mounting/strut set (likewise sold independently) that attaches with a more secure rear mount and cross braces. Installation is simple, and you have the option to change in between floats and wheels in minutes. 6S LiPo advised if taking off from water.
 







More Usefulness
The push-button released, top-mounted hatch provides practical and simple access to the battery compartment that holds a new quick-release, multi-position battery installing tray (inspired by Morgan Mill RC) that fits most 4S to 6S 3200–7000mAh batteries.
 



More Reliability
The updated power system features a motor with a better style that consists of an additional bearing, in addition to a propeller that's formed from product that much better preserves balance and stiffness, to deliver smoother and more reputable efficiency. Plus the ESC is now geared up with an IC5 connector, which is likewise suitable with EC5 ports, for much better and more reputable power shipment.
 







Durable Precision
The lightweight and remarkably strong airframe features composite-reinforced, hollow-core Carbon-Z building and construction. Most importantly it gets here mostly factory-assembled and ended up in a dynamic, high-visibility Carbon Cub SS Signature trim and color scheme. It likewise gets here with factory-installed digital, metal-geared servos and ball-link equipped linkages that deliver crisp and accurate control.
 



Versatile Performance
From smooth and steady slow flight to beyond-scale aerobatics and whatever in between, the Carbon-Z Cub SS has a very broad flight envelope that's ideal for novice giant-scale and experienced pilots alike.

 







Bind-N-Fly Completion Level Benefit
Currently own a Spektrum™ transmitter? Bind-N-Fly (BNF) airplane make entering into the air quickly and with the very best control experience possible much easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you require to do is bind the receiver to a suitable transmitter, complete any final assembly, and fly!

This Bind-N-Fly Basic design is geared up with a Spektrum 2.4GHz DSMX® receiver including AS3X (Artificial Stabilization–3-aXis) technology that works behind the scenes to smooth out the results of wind and turbulence. The result is an increased sense of stability and accuracy that makes you seem like you're flying a much bigger, expertly tuned aircraft.

If this is your very first design of its type, or you desire an additional margin of security while acquainting yourself with the aircraft, you can make it possible for the optional-use SAFE® Select flight envelope protection technology built into the receiver. No shows is needed. Merely change up the binding series as directed in the manual.

With SAFE Select made it possible for, you get:

Pitch and Bank Angle Limits
These envelope restricts keep the aircraft from rolling or pitching upside down. They likewise avoid excessive climb or dive angles.

Automatic Self-Leveling
The aircraft instantly returns to and holds level flight when the sticks are released and in the center position. It's likewise practical for keeping the wings level during takeoffs/launches and landings.

Easy Change Task—No Complex Shows Required
The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any complicated shows and takes simply a couple of seconds.

If you don't want to make it possible for the SAFE Select features, simply bind the receiver normally and it will work like a standard AS3X receiver.

 


Requirements

Airfoil Forming: Modified Clark-Y

Approximate Assembly Time: Less than 1 hour

Approximate Flight Time: 4 - 10 minutes

Battery: Sold Separately

CG (Center Of Mass): 4.1 - 4.7" (105 - 120mm) from leading edge of wing measured at fuselage

Battery Charger: Sold Separately

Completion Level: Bind-N-Fly Basic

Flaps: Yes

Landing Equipment: Repaired main with steerable tail wheel

Minimum Required Radio: 4-channel

Motor Size: BL50

Motor Type: Brushless

Power Type: Electric

Product Length: 56.3" (1430 mm)

Prop Size: 15x7E

Radio: Sold Separately

Receiver: Included

Recommended Motor Battery: 4-6S 4000 - 7000mAh LiPo, 6S LiPo advised if taking off from water

Servos: Included

Speed: 50mph (80kph)

Speed Control: Included

Spinner Size: 2.4" (61 mm)

Steering: Steerable tailwheel

Technology : SAFE Select

Trim Scheme Colors: White, orange, black and gray

Wing Location: 1130 sq in (72.9 sq dm)

Wing Loading: 16.6 - 19.3 oz/sq feet (50.7 - 59.0 g/sq dm)

Wingspan: 84.6" (2149 mm)