E-Flite 150mAh 1S 3.7V 45C LiPo Battery

Regularly acquired with the item that you are currently checking out.



Functions
Everything you need to fly RC todaySAFE® innovation from Horizon HobbyRecovery with the pull of a trigger with Panic Recovery modeProportional 4-channel control with working throttle, rudder, elevator and aileronSteerable tail wheel for easy ground controlPowerful electrical motor for remarkable speed and climb performanceAttractive replica of the Cub Crafters Sport Cub aircraftMike McConville DesignLi-Po battery for long flight times on a single chargeUSB port DC Quick chargerCompact 2.4GHz transmitter with proportional controls and Spektrum™ DSMX® Innovation

Introduction
Fly, swoop and ascend at your own rate with the practical HobbyZone® Sport Cub S. This little replica packs a range of remarkable features into a practical ready-to-fly package so you can teach yourself to fly nearly anywhere. With advanced SAFE® innovation included, you can discover the essentials of flight and advance your skills in several flight modes and quickly go back to constant flight with a pull of a trigger in Panic Recovery mode. This mini replica of the popular full-scale Cub Crafters Sport Cub likewise offers you the liberty of 4-channel control with working throttle, rudder, elevator and ailerons. Most importantly, you’ll constantly experience dependability with 2.4GHz DSMX® innovation integrated in.






Tech Notes


You will need...
Nothing! Everything you need to get flying is included in the box.






Specs


Wingspan: 24.3 in (616mm)
Total Length: 16.3 in (414.5mm)
Flying Weight: 2.0 oz (57 g)
Radio: 6 Channel (Included)
Cut Scheme Colors: Blue and White
Prop Size: 130 x 70mm
Suggested Battery: 150mAh 1ST (included)
Battery charger: Quick DC Battery charger with USB port connection
Landing Gear: Repaired main with steerable tail wheel
Experience Level: Beginner
Recommended Environment: Indoor/Outdoor
Is Assembly Required: No





Media Gallery





 View Image Gallery






Articles, Reviews, and Links




 Preview: HobbyZone Super Cub LP


 The Runway

Want one more fantastic item to match the above stated item?

Parallel Charging Board for Blade mCP X and mCX/mSR/Proto X Lipo

Charge (6) mCX & (6) mCP X / Proto X batteries at the exact same time!


This new CSRC paraboard supports both mCP X and mCX/mSR/Proto X ports and enables you to charge up to twelve batteries at the exact same time! Because it charges in parallel, you can charge as few as one or as many as six batteries of differing capabilities at once.
Also terrific for batteries utilized in the Parkzone Vapor/Night Vapor, P-51, Ash, T-28 Trojan, Sukhoi Su-26, Spitfire, Stryker, Pole Cat, Corsair, as well as Blade Scout and Nano CPX.
Max Charge Current: 4.8A

HOW TO USAGE IT
The paraboard enables you to connect as much as twelve batteries in parallel so that you can charge them as a single bigger mA single cell battery (i.e. 1s6p). The only requirement is that all the batteries be within .10 of a volt of each other prior to charging. For example, if you either time your flights or fly till cutoff. You wish to prevent linking a completely charged battery to a group of discharged cells, considering that a quick rush of existing would occur.

Calclulate your charge rate by combining the mAh of all the batteries you mean to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will tell you what your amperage setting must be. e.x. (6) 3.7V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A