Excel Hobby Blades Corp. Medium Duty Knife w/Cap Carded

This is a Medium Task Knife with Cap from Excel.

FEATURES:
7/16" x 4-3/4" knurled aluminum handle.
4-jaw machined aluminum chuck for protected blade positioning.
Includes one super sharp #24 blade.
Snug fitting plastic safety cap.
Used for accuracy cutting, cutting and removing of paper, plastic,
    wood, cloth and film.
Carded packaging.

INCLUDES:
One Medium Task Knife with Cap.

SPECS:
Length: 4-3/4" (12.1cm)
Size: 7/16" (1.1cm)

Several others have acquired this item in addition to the item that you are presently reading about.

Assorted Blades #2 Knife (5)

This is a Bundle of Five Various Accuracy Hobby Blades by Excel.

FEATURES:
Made from accuracy, top-quality steel.
Double honed.
Interchangeable.
Used for cutting and trimming.
Razor sharp edges!
Contains 5 various blades.
Blades can be found in a clear, plastic safety tube.

INCLUDES:
Five Various Hobby Knife Blades

NEEDS:
#2, #5, or #6 Aluminum Deal with
Security Goggles
Adult Supervision

Often acquired with the item that you are presently reading about.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Remover by Castle Creations.

FEATURES:
Gets rid of the need for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level ideal for the receiver and servos

INCLUDES:
One CC BEC receiver battery remover

NEEDS:
Installation in the aircraft

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to SIX LiPo)
Existing output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Ratings are determined with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V through the Castle Link (offered separately)
    Default voltage is 5.1V

This item compliments the above reviewed item.



This is the JR/Hitec Unassembled Male Port Set from EMS.

FEATURES:
Enables modeler to make their own servo leads and extensions
Gold plated pins for high conductivity and dependability fit wire sizes
    from 20 - 30 AWG

INCLUDES:
Ten male connectors
Thirty pins and direction sheet

NEEDS:
Crimping pins over wire and inserting into connector

COMMENTS:
If matching Female Connectors are required, order EMOM0118.
If servo wire is required, order HRCM4804.
Note: Considered 'Male' due to the fact that of the plastic connector
note the metal pins

Several others have acquired this item in addition to the item that you are presently reading about.

Super Sharp Straight Edge Blade (5)

These are Excel #2 Straight Edge Blades.

FEATURES:
Made from accuracy top-quality steel
Interchangeable
Utilized for the cutting and cutting of wood, plastic, and rubber
Blades are available in a clear plastic safety tube

INCLUDES:
Five #2 Straight Edge Blades

NEEDS:
Excel #2, 5, or 6, Deal with
Security safety glasses
Adult supervision