Excel Hobby Blades Corp. Medium Duty Knife w/Cap Carded

This is a Medium Task Knife with Cap from Excel.

FEATURES:
7/16" x 4-3/4" knurled aluminum handle.
4-jaw machined aluminum chuck for protected blade positioning.
Includes one incredibly sharp #24 blade.
Snug fitting plastic safety cap.
Used for precision cutting, trimming and removing of paper, plastic,
    wood, cloth and film.
Carded packaging.

INCLUDES:
One Medium Task Knife with Cap.

SPECS:
Length: 4-3/4" (12.1cm)
Size: 7/16" (1.1cm)

Several others have actually bought this item along with the item that you are currently reading about.

Assorted Blades #2 Knife (5)

This is a Package of 5 Assorted Accuracy Hobby Blades by Excel.

FEATURES:
Made from precision, high-grade steel.
Double honed.
Interchangeable.
Used for cutting and trimming.
Razor sharp edges!
Contains 5 different blades.
Blades been available in a clear, plastic safety tube.

INCLUDES:
5 Assorted Hobby Knife Blades

REQUIRES:
#2, #5, or #6 Aluminum Deal with
Security Safety glasses
Adult Supervision

Frequently bought with the item that you are currently reading about.

010000400 CC BEC 10A 6S Switching Regulator

This is the CC BEC 10A Receiver Battery Remover by Castle Creations.

FEATURES:
Removes the requirement for a receiver and servo battery pack
Draws greater voltage from the motor batteries and drops it to a
    voltage level ideal for the receiver and servos

CONSISTS OF:
One CC BEC receiver battery eliminator

REQUIRES:
Installation in the airplane

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to 6S LiPo)
Existing output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Scores are figured out with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V through the Castle Link (offered independently)
    Default voltage is 5.1V

This item compliments the above talked about item.



This is the JR/Hitec Unassembled Male Port Set from EMS.

FEATURES:
Permits modeler to make their own servo leads and extensions
Gold plated pins for high conductivity and reliability fit wire sizes
    from 20 - 30 AWG

CONSISTS OF:
Ten male ports
Thirty pins and instruction sheet

REQUIRES:
Crimping pins over wire and inserting into adapter

REMARKS:
If matching Female Connectors are required, order EMOM0118.
If servo wire is required, order HRCM4804.
Note: Thought about 'Male' since of the plastic adapter
note the metal pins

Several others have actually bought this item along with the item that you are currently reading about.

Super Sharp Straight Edge Blade (5)

These are Excel #2 Straight Edge Blades.

FEATURES:
Made from precision high-grade steel
Interchangeable
Utilized for the cutting and trimming of wood, plastic, and rubber
Blades can be found in a clear plastic safety tube

CONSISTS OF:
5 #2 Straight Edge Blades

REQUIRES:
Excel #2, 5, or 6, Deal with
Security safety glasses
Adult supervision