Excel Hobby Blades Corp. Medium Duty Knife w/Cap Carded

This is a Medium Duty Knife with Cap from Excel.

FEATURES:
7/16" x 4-3/4" knurled aluminum handle.
4-jaw machined aluminum chuck for safe and secure blade positioning.
Includes one super sharp #24 blade.
Snug fitting plastic safety cap.
Used for accuracy cutting, trimming and removing of paper, plastic,
    wood, fabric and film.
Carded packaging.

INCLUDES:
One Medium Duty Knife with Cap.

SPECS:
Length: 4-3/4" (12.1cm)
Diameter: 7/16" (1.1cm)

Numerous others have actually gotten this product in addition to the product that you are presently reading about.

Assorted Blades #2 Knife (5)

This is a Bundle of 5 Various Accuracy Hobby Blades by Excel.

FEATURES:
Made from accuracy, high-grade steel.
Double honed.
Interchangeable.
Used for cutting and trimming.
Razor sharp edges!
Contains 5 various blades.
Blades can be found in a clear, plastic safety tube.

INCLUDES:
5 Various Hobby Knife Blades

NEEDS:
#2, #5, or #6 Aluminum Manage
Safety Safety glasses
Adult Guidance

Often gotten with the product that you are presently reading about.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Removes the requirement for a receiver and servo battery pack
Draws greater voltage from the motor batteries and drops it to a
    voltage level suitable for the receiver and servos

CONSISTS OF:
One CC BEC receiver battery remover

NEEDS:
Setup in the airplane

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to SIX LiPo)
Existing output: 12 volts input = 7 amps* continuous, 10 amp peak;
    24 volts input = 5 amps* continuous, 7 amp peak
    *Scores are figured out with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V via the Castle Link (offered individually)
    Default voltage is 5.1V

This product compliments the above discussed product.



This is the JR/Hitec Unassembled Male Connector Set from EMS.

FEATURES:
Allows modeler to make their own servo leads and extensions
Gold plated pins for high conductivity and dependability fit wire sizes
    from 20 - 30 AWG

CONSISTS OF:
10 male adapters
Thirty pins and guideline sheet

NEEDS:
Crimping pins over wire and inserting into port

COMMENTS:
If matching Female Connectors are required, order EMOM0118.
If servo wire is required, order HRCM4804.
Note: Considered 'Male' due to the fact that of the plastic port
note the metal pins

Numerous others have actually gotten this product in addition to the product that you are presently reading about.

Super Sharp Straight Edge Blade (5)

These are Excel #2 Straight Edge Blades.

FEATURES:
Made from accuracy high-grade steel
Interchangeable
Used for the cutting and trimming of wood, plastic, and rubber
Blades come in a clear plastic safety tube

CONSISTS OF:
5 #2 Straight Edge Blades

NEEDS:
Excel #2, 5, or 6, Manage
Safety safety glasses
Adult supervision