Dynamite USB Charger LiPo

This is a superb enhancement to the thing presently being discussed.

Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is terrific for lots of applications, and is a terrific option for lots of smaller drones and aircrafts! Features a JST connector on the discharge leads and basic JST-XH balance leads. 40C continuous discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Below is a fantastic thing that numerous others have actually bought at the very same time.

360Mah 2S 30C Lipo Battery: Axial Scx24

360mAh Two 30C LiPo Battery: Axial SCX24

30C Continous / 60C Brust

Perfect for the axial scx24

Specs:

Application(s): axial scx24

Discharge Adapter: PH 2.0

Balance Adapter: JST-XH

Lenth : 53.5mm

Width : 30.5mm

Height: 7.7mm

Weight: 0.8 Ounces

This thing compliments the above discussed thing.

SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Wht



.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Includes radio transmitter and receiver and battery.

Comes with ESC, motor, and servo currently installed.

Features a practical new body design.

Licensed wheels are modeled after 1:1 KMC Machete Wheels.

Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires.

3-Link front and 4-link rear suspension supplies ideal handling.

Two LED lights are consisted of in the front bumper for night driving.

Worm drive gear on front and rear axles develops additional ground clearance, improving on high-pinion axles.

Realistic steel frame rails add strength.

True, full-time 4-wheel-drive.

Getting rid of one clip enables the body to be slanted for battery access.





Overview
No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you're stuck at work, go crawling on your desk. An untidy room becomes an ideal obstacle course. Take your car exterior — where its water-resistant electronics are safe from the elements — and set up an interesting path with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while practical steel frame rails withstand hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC carries out like a winner and appears like one, too. The practical body flights on licensed KMC Machete wheels and Nitto Trail Grappler tires. For fast battery access, simply get rid of one clip to tilt back the body. Two LEDs in the front bumper illuminate the path for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics consisted of and installed.





 






STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and durable steel c-channel frame rails with bracing to keep whatever undamaged and aligned.
 



DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the correct amount of torque to assist rise high climbs up. It's mated to a steel motor install to keep flex to a minimum, which assists secure the gears.
 







WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop greater ground clearance.
 



DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and resilience to keep things running during tough climbs up and rough tracks.
 







SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 



COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling efficiency you have actually known and expect from Axial.
 







FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic strong axle design. For ideal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 







LED LIGHTS INCLUDED
Two intense LED lights are consisted of and are mounted in the front bumper. An additional LED light port on the ESC enables you to add optional LED lights.
 



4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We have actually also consisted of additional suspension links for adjusting your wheelbase length.
 







KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are legendary in the off-road world. They are formed in black and function spectacular scale details, despite the small scale.
The formally licensed Nitto Trail Grappler M/T Tires use a wonderful mix of off-road efficiency while still retaining excellent composure for on-road use.
 



HINGED BODY SYSTEM
The hinged body system uses simple access to on-board elements. You can quickly reach the battery and chassis by eliminating simply one body clip and swinging the body up.
 







FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't mean the features require to do the same. No bushings discovered here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire car.
 



AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also offering defense for the servo gears in the event of a bind or impact.
 




 





Specs

Approximate Assembly Time: No assembly required

Ball Bearings: Full set

Battery: Consisted of

Body: Axial Jeep JL Hardtop

Brakes: Essential with ESC

Battery charger: Consisted of

Chassis: Stamped Steel Chassis Rails

Color Alternative: White

Conclusion Level: Ready-To-Run

Differential: Worm gear 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 3.9 in (99.5mm)

Ground Clearance: 1.06" (27mm)

Motor Size: 180

Motor Type: Brushed

Pinion: 10T

Power Type: Electric

Item Height: 4.2" (107 mm)

Item Length: 7.8" (198 mm)

Item Width: 3.9" (99 mm)

Radio: Consisted of

Rear Track: 3.9 in (99.5mm)

Receiver: Consisted of

Scale: 1/24

Servos: Consisted of

Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)

Speed Control: Included

Spur Equipment: 55T

Suspension: 3 Link Front and 4 Link Rear

Tire Tread: Trail Grappler

Vehicle Type: Rock Crawler

Water-Resistant: Yes

Wheel Width: .48" (12.4mm)

Wheelbase: 5.2" (132 mm)