Dynamite USB Charger LiPo

This is a amazing addition to the item presently being discussed.

Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is fantastic for tons of applications, and is an excellent alternative for tons of smaller sized drones and aircrafts! Functions a JST connector on the discharge leads and standard JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Right here is a excellent item that several others have actually bought at the very same time.

360Mah 2S 30C Lipo Battery: Axial Scx24

360mAh 2S 30C LiPo Battery: Axial SCX24

30C Continous / 60C Brust

Perfect for the axial scx24

Specs:

Application(s): axial scx24

Discharge Connector: PH 2.0

Balance Connector: JST-XH

Lenth : 53.5mm

Width : 30.5mm

Height: 7.7mm

Weight: 0.8 Ounces

This item compliments the above discussed item.

SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Wht



.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Consists of radio transmitter and receiver and battery.

Comes with ESC, motor, and servo already installed.

Features a practical new body design.

Licensed wheels are modeled after 1:1 KMC Machete Wheels.

Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires.

3-Link front and 4-link rear suspension provides optimum handling.

Two LED lights are included in the front bumper for night driving.

Worm drive gear on front and rear axles creates extra ground clearance, enhancing on high-pinion axles.

Realistic steel frame rails include strength.

True, full-time 4-wheel-drive.

Removing one clip permits the body to be tilted for battery access.





Overview
No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you're stuck at work, go crawling on your desk. A messy space ends up being a perfect challenge course. Take your vehicle outside — where its waterproof electronics are safe from the components — and established an amazing path with a couple of holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over huge challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to tough knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC carries out like a winner and looks like one, too. The realistic body rides on certified KMC Machete wheels and Nitto Trail Grappler tires. For fast battery access, simply remove one clip to tilt back the body. Two LEDs in the front bumper illuminate the path for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and set up.





 






STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep whatever undamaged and aligned.
 



DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to help rise high climbs. It's mated to a steel motor install to keep flex to a minimum, which helps protect the gears.
 







WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop greater ground clearance.
 



DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and toughness to keep things running during difficult climbs and rough routes.
 







SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable optimal suspension travel while keeping the power to the wheels.
 



COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and long lasting plastic suspension links provides the crawling performance you've known and expect from Axial.
 







FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, molded plastic solid axle style. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 







LED LIGHTS INCLUDED
Two brilliant LED lights are included and are installed in the front bumper. An additional LED light port on the ESC permits you to include optional LED lights.
 



4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the rear which is enhanced to lower axle steer and torque twist. We've also included extra suspension links for changing your wheelbase length.
 







KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are famous in the off-road world. They are molded in black and function spectacular scale details, regardless of the small scale.
The formally licensed Nitto Trail Grappler M/T Tires use a fantastic mix of off-road performance while still keeping outstanding composure for on-road usage.
 



HINGED BODY SYSTEM
The hinged body system uses simple access to on-board components. You can rapidly reach the battery and chassis by removing simply one body clip and swinging the body up.
 







FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size doesn't mean the functions require to do the same. No bushings discovered here, instead the drivetrain is easily spinning on sealed cartridge bearings throughout the entire vehicle.
 



AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering precision, while also offering protection for the servo gears in the event of a bind or effect.
 




 





Requirements

Approximate Assembly Time: No assembly required

Ball Bearings: Full set

Battery: Consisted of

Body: Axial Jeep JL Hardtop

Brakes: Essential with ESC

Battery charger: Consisted of

Chassis: Stamped Steel Chassis Rails

Color Alternative: White

Completion Level: Ready-To-Run

Differential: Worm gear 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 3.9 in (99.5mm)

Ground Clearance: 1.06" (27mm)

Motor Size: 180

Motor Type: Brushed

Pinion: 10T

Power Type: Electric

Product Height: 4.2" (107 mm)

Product Length: 7.8" (198 mm)

Product Width: 3.9" (99 mm)

Radio: Consisted of

Rear Track: 3.9 in (99.5mm)

Receiver: Consisted of

Scale: 1/24

Servos: Consisted of

Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)

Speed Control: Included

Spur Gear: 55T

Suspension: 3 Link Front and 4 Link Rear

Tire Tread: Trail Grappler

Vehicle Type: Rock Crawler

Waterproof: Yes

Wheel Width: .48" (12.4mm)

Wheelbase: 5.2" (132 mm)