Dynamite WP 60A FWD/REV Brushed ESC

This water resistant, brushed ESC is NiMH/LiPo compatible and provides forward/brake/reverse, forward/brake and spider drive modes. Its compatibility makes it a perfect replacement ESC or the best upgrade to your current non-LiPo, non-waterproof, or minimal motor spec ESC.

1 While water resistant, this part has actually not been created to immerse in water for extended periods of time and must NOT be treated like a submarine. Please be sure to go through the basic precautions noted in the user???s manual.

Features
Waterproof for all weather condition operation1
LiPo and NiMH compatible
Program functions changed with making use of jumper pins
Approximately an 8T motor limitation
Detachable installing tabs create an even smaller footprint and enable hard installing in a wide range of vehicles
Crawler running mode
Pre-wired with EC3 battery connector and RTR compatible motor bullets for simple installation

Specifications
Type: Waterproof 60A Brushed ESC
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Crawler Mode: Yes
Automobile Cutoff: Yes
Overload Protection: Yes
Low-Voltage Cutoff Programmable: Yes
Constant Present: FWD: 60A REV: 30A
Optimum Burst Current: FWD: 360A REV: 180A
Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd
Motor Limitation: 2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Battery Input Lead: 16AWG, 4.53 in (115mm)
Input Adapter Types: EC3
Motor Output Lead: 16AWG, 4.53 in (115mm)
Motor Adapter: 3.5mm Tamiya style bullet
Length: 1.48 in (37.5mm)
Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height: 0.71 in (18mm)
Weight: 1.41 oz (40g)
PWM Frequency: 1KHz
Full On Resistance: .0008 ohms
BEC: Yes
BEC Type: Linear
BEC Voltage: 5V
BEC Continous Current: 2A
Speed Control Type: Brushed
Drive Type: Forward/Brake/Reverse
Constant Optimum Current (will be Amperage): 50 - 75A