Dynamite WP 60A FWD/REV Brushed ESC

This waterproof, brushed ESC is NiMH/LiPo suitable and offers forward/brake/reverse, forward/brake and spider drive modes. Its compatibility makes it an ideal replacement ESC or the best upgrade to your existing non-LiPo, non-waterproof, or restricted motor specification ESC.

1 While waterproof, this part has not been designed to immerse in water for long periods of time and need to NOT be dealt with like a submarine. Please make sure to go through the basic safety measures noted in the user???s manual.

Features
Water resistant for all weather operation1
LiPo and NiMH suitable
Program functions altered with the use of jumper pins
Up to an 8T motor limit
Removable installing tabs produce an even smaller sized footprint and allow hard installing in a wide array of vehicles
Spider running mode
Pre-wired with EC3 battery adapter and RTR suitable motor bullets for simple installation

Specs
Type: Water resistant 60A Brushed ESC
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Spider Mode: Yes
Automobile Cutoff: Yes
Overload Protection: Yes
Low-Voltage Cutoff Programmable: Yes
Constant Present: FWD: 60A REV: 30A
Optimum Burst Current: FWD: 360A REV: 180A
Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd
Motor Limit: TWO Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Battery Input Lead: 16AWG, 4.53 in (115mm)
Input Connector Types: EC3
Motor Output Lead: 16AWG, 4.53 in (115mm)
Motor Connector: 3.5mm Tamiya design bullet
Length: 1.48 in (37.5mm)
Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height: 0.71 in (18mm)
Weight: 1.41 oz (40g)
PWM Frequency: 1KHz
Full On Resistance: .0008 ohms
BEC: Yes
BEC Type: Linear
BEC Voltage: 5V
BEC Continous Current: 2A
Speed Control Type: Brushed
Drive Type: Forward/Brake/Reverse
Constant Optimum Current (will be Amperage): 50 - 75A