DuraTrax Charge Lead Banana Plugs to Vend MQ CC RS4

This is the DuraTrax Charge Lead
with Banana Plugs and Mini Plug for use with the
Duratrax Mini Quake, Vendetta, and Cliff Climber
HPI Micro RS4, Losi Mini's and lots of other 1/18 scale vehicles.

FEATURES:
Charges a battery with a Mini Plug

CONSISTS OF:
One DuraTrax Charge Lead with Banana Plugs and Mini Plug

NEEDS:
Connecting between battery and charger

Want another wonderful product to compliment the above mentioned product?



This is the DuraTrax LiPo 7.4V 1600mAh 20C Difficult Case Mini Battery Load
with Mini Plug.

FEATURES:
For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
    1/16 to 1/18 scale automobiles that utilize batteries with mini plugs

CONSISTS OF:
DuraTrax LiPo 7.4V 1600mAh 20C Difficult Case Battery Load with Mini Plug

NEEDS:
Balancer such as the Team Checkpoint Balancer, and 2S
    Adapter XH Plug,

SPECS:
Capability: 1600mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Constant Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
Release Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Load Measurements: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are consisted of in weights

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or leak cells
NEVER place on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1g
All measurements +/- 1mm

This is a superb addition to the product currently being talked about.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Developed to be user-friendly to operate
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both AC and DC power alternatives
One year item warranty against producer flaws (through the producer - Racers Edge)

Consists of:
One Racers Edge EZ80 AC DC Multi-Chemistry Charger

Requires:
Compatible battery

Specifications
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Existing: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Measurements: Approx. 145x145x56mm