Dumas Dehavilland DH89 Kit 42

This is the radio managed, electric powered
Dumas Dehavilland DH-89 set

FUNCTIONS:
Construction: Hand chosen laser cut balsa
Vacuum molded nose cone, windscreen, engine cowls, nacelles and
    wheel pants
Rudder Control: Pull-pull cable televisions
Aileron Control: Flexible control cable televisions
Elevator Control: Wire pushrod
Servo Placement: Installed in rails on fuselage
Scale Rigging: Functional flying wires and tail braces

CONSISTS OF:
All balsa, light-weight colored (gray) tissue covering
    two 2" (50.8mm) light-weight foam primary wheels, CA hinges, rigging
    wire, control cable televisions, instruction manual, three full-size plan
    sheets, acetate sheets for windows, and all hardware
    to complete this set

NEEDS:
2 GWS IPS (GWSG2021) motors (3.5:1 gear ratio)
3 channel radio system (minimum)
4 micro servos
One 25A ESC w/BEC for brushed motors (GPMM2025)
2 cell 1200mAh LiPo battery (GPMP0835)
GWS 7x6 props, (GWSQ2015)
Structure and field devices

SPECS:
Wingspan: 42" (1066mm)
Center of mass (CG): 1 5/8" (41.2mm) aft of the upper wing leading
    edge at the root
Control Throws-
    Ailerons, Up and Down: 1/2" (12.7mm)
    Elevator, Up and Down: 5/8" (15.9mm)
    Rudder, Left and Right: 1" (25.4mm)

Comments: Motors are hardwired/soldered to speed control