Dumas Chris-Craft Cobra 27 Kit

This is a DUMAS 1/8 scale Reproduction of the the 1955 CHRIS CRAFT COBRA.

FEATURES:
Double planked hull with birch plywood and mahogany veneer
Total chrome diecast fitting set
Pre-formed ABS plastic turtle deck, fin, and cockpit
Total running hardware package with bronze prop

CONSISTS OF:
One total instruction manual and plans/setup sheet
One sheet of DUMAS/CHRIS CRAFT decals
Vacuum formed ABS turtle deck/fin, and cockpit
Clear lexan windshield
8 mahogany frame formers
Fifty six mahogany deck planking strips
Twenty 8 birch sub-planking sections
9 spruce turtle deck stringers
Three spruce motor mounting/keel obstructs
5 Basswood jackstaffs
One Mahogany nose block
Twelve styrene deck planking sheets and turtle deck joint
5 assorted size brass hardware tubes
Six NO.4 ½" pan head screws
One 18" length of cockpit package coaming tubing
One plexiglass instrument panel sheet
Cast metal navigation lights, ventilators, manages, step plates,rings
    and guiding wheel.
Complete Running Hardware Package with Bronze Prop

SPECIFICATIONS:
Length: 27"
Beam: 9¾"
Weight: (approx.)
Scale: 1:8

NEEDS:
Motor: One 550-size (15 to 27 turn) with a basic 1/8" shaft
or Dumas #2004 6V scale or #2025 6V high speed motor
Radio: 2 Channel
Servo: One Heavy Responsibility and One Standard
One 7.2V 6 Cell Battery, Charger, and Building Devices
One Sturdy Mechanical Speed Control w/Resistor
Or Electronic Speed Control.