Dumas Chris-Craft Cobra 27 Kit

This is a DUMAS 1/8 scale Reproduction of the the 1955 CHRIS CRAFT COBRA.

FEATURES:
Double planked hull with birch plywood and mahogany veneer
Complete chrome diecast fitting set
Pre-formed ABS plastic turtle deck, fin, and cockpit
Complete running hardware set with bronze prop

CONSISTS OF:
One complete instruction manual and plans/setup sheet
One sheet of DUMAS/CHRIS CRAFT decals
Vacuum formed ABS turtle deck/fin, and cockpit
Clear lexan windshield
Eight mahogany frame formers
Fifty 6 mahogany deck planking strips
Twenty 8 birch sub-planking sections
Nine spruce turtle deck stringers
3 spruce motor mounting/keel blocks
5 Basswood jackstaffs
One Mahogany nose block
Twelve styrene deck planking sheets and turtle deck joint
5 various size brass hardware tubes
6 NO.4 ½" pan head screws
One 18" length of cockpit set coaming tubing
One plexiglass instrument panel sheet
Cast metal navigation lights, ventilators, deals with, step plates,rings
    and guiding wheel.
Complete Running Hardware Set with Bronze Prop

SPECIFICATIONS:
Length: 27"
Beam: 9¾"
Weight: (approx.)
Scale: 1:8

REQUIRES:
Motor: One 550-size (15 to 27 turn) with a basic 1/8" shaft
or Dumas #2004 6V scale or #2025 6V high speed motor
Radio: 2 Channel
Servo: One Heavy Responsibility and One Standard
One 7.2V 6 Cell Battery, Battery charger, and Building Devices
One Strong Mechanical Speed Control w/Resistor
Or Electronic Speed Control.