Dumas L-19 Bird Dog Kit 40

This is the electrical powered, radio managed, park scale
Dumas L19 Attendant Airplane Kit.

FEATURES:
Construction: Laser cut balsa
Wing: Two piece with center area, high install positioning
Covering: Two sheets of red and 2 sheets of white tissue
Cowl: Vacuum formed plastic, white in color
Landing Gear: Preformed wire .062" (1.6mm) diameter with .032"
    (0.81mm) diameter tail wheel wire
Wheels: Two 1.75" (45mm) diameter lightweight foam primary wheels and
    one 0.75" (19mm) plastic tail wheel
Windows: 3 sheets acetate with pattern in handbook for all windows
Rudder: Pull-pull design with horn and cables consisted of

CONSISTS OF:
All needed balsa, 2 sheets red and 2 sheets white tissue, cowl,
    2 decal sheets, three wheels, three acetate sheets, hardware,
    instruction manual and 2 full-size plan sheets

REQUIRES:
Electric Motor: GWS "A" (IPS-DX2BB-AXCS) or MPI EPU-6 drive system
    advised per Dumas
Radio: 3-channel with micro size receiver
Servos: Two micro size for rudder and elevator
Electronic Speed Control: 5A with BEC
Battery: 7.4V 700mAh Lithium Polymer
Propeller: 9x7 for electrical application
Complete For Covering: Butyrate dope such as Midwest Aerogloss, light-
    weight Mylar covering can also be used, see COMMENTS
Building and field devices

SPECIFICATIONS:
Length: 27" (68.6cm)
Wingspan: 40" (101.6cm)
Wing Area: 215 sq in (13.89 sq dm)
Motor Placement: Offset 1.5° best thrust
Center of Gravity (CG): 1-7/8" (48mm) from the leading edge of the
    wing measured at the fuselage
Control Tosses:
    Elevator: up and down 3/4" (19mm)
    Rudder: left and best 7/8" (22mm)
    Airfoil: Flat bottom

COMMENTS:
Do not use Ultra Cote or MonoKote covering. It is too heavy and will
    diminish excessive, damaging the lightweight structures.