Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to offer the ultimate in fuel filtration.
Can be used with fuel or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Often acquired with the product that you are presently reviewing.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction reduces turning mass
    for greater output and longer life.
Reinforcing carbon fibers help keep true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props need balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

Want one more fantastic product to enhance the above pointed out product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

Want one more fantastic product to enhance the above pointed out product?

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not offered independently.

Right here is a fantastic product that numerous others have purchased the very same time.

Universal Servo Grease

This is for use with all makers' servo gear sets.
To use, simply dismantle servo, throughly clean all old grease off gears, and
utilize new grease sparingly throughout reassembly.
The grease (.1 oz) comes in a little toothpaste-like metal tube.

DEE
8.Oct.97

Right here is a fantastic product that numerous others have purchased the very same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This allows you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECIFICATIONS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This product is regularly acquired with the above pointed out product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to get rid of and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

REQUIRES:
Setting up with basic fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from idea to tip, not the main
    body of the filter.