Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to supply the ultimate in fuel filtration.
Can be utilized with gas or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Often acquired with the product that you are presently reviewing.



This is a 12.5x6 aircraft propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction reduces turning mass
    for higher output and longer life.
Reinforcing carbon fibers help keep real, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props need balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole diameter: 1/4"

Want an additional fantastic product to match the above pointed out product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

Want an additional fantastic product to match the above pointed out product?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This component is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not readily available individually.

Here is a fantastic product that lots of others have purchased the same time.

Universal Servo Grease

This is for usage with all producers' servo gear sets.
To usage, merely dismantle servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly during reassembly.
The grease (.1 oz) is available in a little toothpaste-like metal tube.

DEE
8.Oct.97

Here is a fantastic product that lots of others have purchased the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECIFICATIONS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This product is regularly acquired with the above pointed out product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

REQUIRES:
Installing with basic fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External diameter: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from pointer to tip, not the main
    body of the filter.