Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to supply the supreme in fuel filtration.
Can be utilized with fuel or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Often purchased with the item that you are currently reading about.



This is a 12.5x6 plane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction decreases turning mass
    for greater output and longer life.
Reinforcing carbon fibers assist maintain real, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole diameter: 1/4"

Want another terrific item to compliment the above discussed item?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Perfect for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro content

Want another terrific item to compliment the above discussed item?

Air Filter Stampede

This is the Replacement Air Filter Aspect for the Traxxas Nitro Stampede.
    This element lies in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not available individually.

Below is a terrific item that numerous others have purchased the exact same time.

Universal Servo Grease

This is for use with all manufacturers' servo gear sets.
To use, simply disassemble servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly throughout reassembly.
The grease (.1 oz) can be found in a little toothpaste-like metal tube.

DEE
8.Oct.97

Below is a terrific item that numerous others have purchased the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This enables you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECIFICATIONS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This item is often purchased with the above discussed item.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

INCLUDES:
One assembled fuel filter

REQUIRES:
Installing with standard fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is measured from suggestion to tip, not the primary
    body of the filter.