Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to supply the supreme in fuel filtration.
Can be used with gasoline or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Frequently purchased with the item that you are presently reading about.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon construction decreases rotating mass
    for greater output and longer life.
Reinforcing carbon fibers help keep real, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

Want an additional fantastic item to enhance the above mentioned item?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Fit for the varied throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Variety Super Responsibility Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want an additional fantastic item to enhance the above mentioned item?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not available individually.

Right here is a fantastic item that lots of others have actually purchased the same time.

Universal Servo Grease

This is for usage with all manufacturers' servo gear sets.
To usage, just take apart servo, throughly tidy all old grease off gears, and
use new grease sparingly throughout reassembly.
The grease (.1 oz) is available in a little toothpaste-like metal tube.

DEE
8.Oct.97

Right here is a fantastic item that lots of others have actually purchased the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECIFICATIONS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This item is regularly purchased with the above mentioned item.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and tidy filtering mesh

CONSISTS OF:
One assembled fuel filter

NEEDS:
Setting up with conventional fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
Outer size: 10.5mm (0.41")

REMARKS:
The length of the filter is determined from pointer to tip, not the primary
    body of the filter.