Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to provide the supreme in fuel filtration.
Can be used with gasoline or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Regularly gotten with the thing that you are presently checking out.



This is a 12.5x6 aircraft propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon construction reduces turning mass
    for higher output and longer life.
Reinforcing carbon fibers help preserve true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Density at center: 1/2" Hole size: 1/4"

Want an additional wonderful thing to enhance the above pointed out thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Matched for the different throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want an additional wonderful thing to enhance the above pointed out thing?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This aspect lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, use TRAC4060.
The rubber filter body is not readily available separately.

Below is a wonderful thing that many others have actually bought at the exact same time.

Universal Servo Grease

This is for use with all manufacturers' servo gear sets.
To use, simply take apart servo, throughly clean all old grease off gears, and
use new grease sparingly throughout reassembly.
The grease (.1 oz) comes in a little toothpaste-like metal tube.

DEE
8.Oct.97

Below is a wonderful thing that many others have actually bought at the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the distance in between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Installation

SPECIFICATIONS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This thing is regularly gotten with the above pointed out thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

CONSISTS OF:
One put together fuel filter

REQUIRES:
Installing with standard fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

COMMENTS:
The length of the filter is determined from idea to tip, not the primary
    body of the filter.