Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to supply the supreme in fuel filtration.
Can be utilized with fuel or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly purchased with the product that you are currently reviewing.



This is a 12.5x6 plane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building reduces turning mass
    for higher output and longer life.
Reinforcing carbon fibers help keep real, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

Want an additional fantastic product to match the above pointed out product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Suitable for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Fit for the diverse throttle variety of off-road racing
Medium heat variety

CONSISTS OF:
One Traxxas Medium Heat Variety Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro content

Want an additional fantastic product to match the above pointed out product?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This component lies in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

REMARKS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not available separately.

Below is a fantastic product that lots of others have actually purchased the very same time.

Universal Servo Grease

This is for usage with all makers' servo gear sets.
To usage, simply disassemble servo, throughly clean all old grease off gears, and
use new grease moderately throughout reassembly.
The grease (.1 oz) can be found in a small toothpaste-like metal tube.

DEE
8.Oct.97

Below is a fantastic product that lots of others have actually purchased the very same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This enables you to extend the distance between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Installation

SPECS:
Length: 6" (152mm)

REMARKS:
Wire color code: Hitec-
Black: unfavorable
Red: positive
Yellow: signal

This product is often purchased with the above pointed out product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to get rid of and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

NEEDS:
Setting up with standard fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

REMARKS:
The length of the filter is measured from suggestion to tip, not the main
    body of the filter.