Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to offer the ultimate in fuel filtration.
Can be utilized with gasoline or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECS:
Length: 1"

Regularly purchased with the product that you are presently checking out.



This is a 12.5x6 airplane propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction minimizes rotating mass
    for higher output and longer life.
Reinforcing carbon fibers help preserve real, consistent pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is CRUCIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 12.5" Pitch: 6
Thickness at hub: 1/2" Hole diameter: 1/4"

Want an additional terrific product to compliment the above pointed out product?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Suitable for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Fit for the different throttle range of off-road racing
Medium heat range

CONSISTS OF:
One Traxxas Medium Heat Variety Super Responsibility Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro content

Want an additional terrific product to compliment the above pointed out product?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

CONSISTS OF:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, use TRAC4060.
The rubber filter body is not available individually.

Below is a terrific product that several others have purchased the same time.

Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, simply take apart servo, throughly clean all old grease off gears, and
use brand-new grease sparingly throughout reassembly.
The grease (.1 oz) comes in a small toothpaste-like metal tube.

DEE
8.Oct.97

Below is a terrific product that several others have purchased the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This permits you to extend the distance between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Setup

SPECS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: favorable
Yellow: signal

This product is regularly purchased with the above pointed out product.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

CONSISTS OF:
One assembled fuel filter

REQUIRES:
Setting up with basic fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is determined from pointer to tip, not the main
    body of the filter.