Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A mix clunk-type weight and fuel filter.
Made of sintered bronze to supply the ultimate in fuel filtration.
Can be used with gas or radiance fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Frequently acquired with the thing that you are currently reading about.



This is a 12.5x6 aircraft propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction reduces rotating mass
    for higher output and longer life.
Reinforcing carbon fibers help maintain true, continuous pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

REQUIRES:
ALL props require balancing, this is CRUCIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Density at hub: 1/2" Hole size: 1/4"

Want another fantastic thing to enhance the above discussed thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines
Suited for the different throttle variety of off-road racing
Medium heat variety

INCLUDES:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

REQUIRES:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

Want another fantastic thing to enhance the above discussed thing?

Air Filter Stampede

This is the Replacement Air Filter Component for the Traxxas Nitro Stampede.
    This aspect is located in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Diameter: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the total air filter with rubber body, use TRAC4060.
The rubber filter body is not available independently.

Here is a fantastic thing that lots of others have bought at the same time.

Universal Servo Grease

This is for use with all producers' servo gear sets.
To use, merely take apart servo, throughly tidy all old grease off gears, and
use new grease sparingly throughout reassembly.
The grease (.1 oz) can be found in a small toothpaste-like metal tube.

DEE
8.Oct.97

Here is a fantastic thing that lots of others have bought at the same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This enables you to extend the distance between your
    receiver and servo.

INCLUDES:
(1) Extension

REQUIRES:
Setup

SPECIFICATIONS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: positive
Yellow: signal

This thing is regularly acquired with the above discussed thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part links inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to get rid of and tidy filtering mesh

INCLUDES:
One assembled fuel filter

REQUIRES:
Setting up with standard fuel tubing connected to each end.

SPECS:
Length: 29mm (1.15")
External size: 10.5mm (0.41")

COMMENTS:
The length of the filter is determined from tip to tip, not the main
    body of the filter.