Dubro Tank Filter, 5 Grams

This is a Tank Filter from Dubro.

FEATURES:
A combination clunk-type weight and fuel filter.
Made of sintered bronze to offer the supreme in fuel filtration.
Can be utilized with gas or glow fuel.
Designed to fit all clunk tanks.

INCLUDES:
One Tank Filter.

REQUIRES:
Clunk-type fuel tank

SPECIFICATIONS:
Length: 1"

Often bought with the thing that you are presently reading about.



This is a 12.5x6 aircraft propeller. It is a "tractor" (not a "pusher") prop.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction lowers turning mass
    for higher output and longer life.
Reinforcing carbon fibers assist preserve true, constant pitch
    at any rpm.
"C2" design.

INCLUDES:
One carbon-reinforced NYLON propeller

NEEDS:
ALL props need balancing, this is CRUCIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 12.5" Pitch: 6
Thickness at center: 1/2" Hole diameter: 1/4"

Want another fantastic thing to enhance the above mentioned thing?

Glow Plug S-Dty Long/Med

This is the Traxxas Super Responsibility Long Glowplug.

FEATURES:
Perfect for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Matched for the different throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Range Super Responsibility Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro material

Want another fantastic thing to enhance the above mentioned thing?

Air Filter Stampede

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.
    This element is located in the rubber air filter body.

FEATURES:
Pre-oiled

INCLUDES:
One air filter element.

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Size: 30mm (1.18")
Height: 17.5mm (0.69")

COMMENTS:
For the complete air filter with rubber body, usage TRAC4060.
The rubber filter body is not offered separately.

Right here is a fantastic thing that numerous others have purchased the exact same time.

Universal Servo Grease

This is for usage with all manufacturers' servo gear sets.
To usage, just disassemble servo, throughly clean all old grease off gears, and
utilize brand-new grease sparingly during reassembly.
The grease (.1 oz) can be found in a little toothpaste-like metal tube.

DEE
8.Oct.97

Right here is a fantastic thing that numerous others have purchased the exact same time.

Servo Extension 6

This is a 6" Servo Extension by Hitec.

FEATURES:
This enables you to extend the range in between your
    receiver and servo.

INCLUDES:
(1) Extension

NEEDS:
Setup

SPECIFICATIONS:
Length: 6" (152mm)

COMMENTS:
Wire color code: Hitec-
Black: negative
Red: positive
Yellow: signal

This thing is regularly bought with the above mentioned thing.

In-Line Fuel Filter Alum w/Plug

This is an In-Line Fuel Filter for Nitro Applications from Dubro.
This part connects inbetween the fuel tank and carburetor.

FEATURES:
Natural aluminum color
Filter body seperates to eliminate and clean filtering mesh

INCLUDES:
One put together fuel filter

NEEDS:
Installing with basic fuel tubing attached to each end.

SPECS:
Length: 29mm (1.15")
Outer diameter: 10.5mm (0.41")

COMMENTS:
The length of the filter is determined from pointer to tip, not the primary
    body of the filter.