Dubro 3" Super Lite Wheels

These are 3" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam building and construction pre-mounted on
gray plastic 7 spoke rims.
Rib tread design.

INCLUDES:
2 3" Super Lite Pre-mounted Wheels

REQUIRES:
Wheel collars to hold them on the axle.
May require reaming out the hole to mount on larger axle.

SPECS:
Size: 3" OD
Size: .178" axle hole
Weight: 13.84 gr

Want an additional terrific thing to compliment the above mentioned thing?

11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 11" (279mm)
Pitch: 8
Center inner size: 0.25" (6.3mm)

This thing is frequently bought with the above mentioned thing.



MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Low-cost,
Easy, Clean, and When Compared to "old made" Coverings, Quick To Use.

For great covering ideas and to insure an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive is Activated When Heat is Applied
Diminishes to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Water resistant
Stronger and Lighter Than Standard Silk and Dope Coverings
May be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Aluminum Covering
One Instruction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Various Great deals of MonoKote May
    Vary Slightly In Color In between Production Runs of These Products.
If Using 3 or More Rolls of the Same Color, it is Recommended to
    Utilize a 25' Roll (TOPQ1205) To Make sure the Same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Should Be Utilized With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: TOPQ4105

MonoKote is a High Temperature Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam
    (EconoKote may be used on top of, however not under MonoKote.)
Temperature Varies:
    Attaching to Wood: 215 - 240°F (activating the glue)
    Partial Shrinkage: 230 - 270°F
    Maximum Shrinkage: 270 - 350°F

This thing is frequently bought with the above mentioned thing.

3/32" Nickel Plated Dura Collars

These are 3/32" Nickel Plated Brass Dura-Collars.

FUNCTIONS:
Nickel plated brass construction.

INCLUDES:
Four collars
Four 4-40 x1/8" set screws
One .050" allen wrench

REQUIRES:
Installation.

SPECS:
Length: .189"
Size: 3/32" ID .248 OD