Dubro 3" Super Lite Wheels

These are 3" Super Lite Wheels from Dubro.

FEATURES:
Black impact-absorbing foam building and construction pre-mounted on
gray plastic 7 spoke rims.
Rib tread design.

INCLUDES:
Two 3" Super Lite Pre-mounted Wheels

NEEDS:
Wheel collars to hold them on the axle.
May need reaming out the hole to install on larger axle.

SPECS:
Diameter: 3" OD
Diameter: .178" axle hole
Weight: 13.84 gr

Want another great item to enhance the above mentioned item?

11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props need balancing, this is VERY important, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 11" (279mm)
Pitch: 8
Hub inner diameter: 0.25" (6.3mm)

This item is regularly bought with the above mentioned item.



MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Economical,
Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

For fantastic covering ideas and to insure a professional finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq feet
Dry Adhesive is Activated When Heat is Applied
Shrinks to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Waterproof
More powerful and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Aluminum Covering
One Guideline Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Different Great deals of MonoKote Might
    Vary Somewhat In Color Between Production Runs of These Products.
If Using Three or More Rolls of the Exact same Color, it is Suggested to
    Use a 25' Roll (TOPQ1205) To Make sure the Exact same Dye Lot for the Entire
    Design Being Covered.
LustreKote Primer Should Be Used With LustreKote Paint to Highlight Its
    True Color.
MonoKote Trim Sheet: TOPQ4105

MonoKote is a High Temperature level Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam
    (EconoKote might be utilized on top of, but not under MonoKote.)
Temperature level Varies:
    Connecting to Wood: 215 - 240°F (activating the glue)
    Partial Shrinking: 230 - 270°F
    Optimum Shrinking: 270 - 350°F

This item is regularly bought with the above mentioned item.

3/32" Nickel Plated Dura Collars

These are 3/32" Nickel Plated Brass Dura-Collars.

FEATURES:
Nickel plated brass construction.

INCLUDES:
Four collars
Four 4-40 x1/8" set screws
One .050" allen wrench

NEEDS:
Installation.

SPECS:
Length: .189"
Diameter: 3/32" ID .248 OD