Dubro T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon construction

CONSISTS OF:
2 control horns w/5 adjusting holes and 2 installing holes
(1-1/8" long [tall])
2 installing plates w/2 installing holes (1/2"x1/2")
Four 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

Regularly acquired with the product that you are currently reviewing.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon construction

CONSISTS OF:
2 control horns w/4 adjusting holes and 2 installing holes
(3/4" long [tall])
2 installing plates w/2 installing holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

Want an additional great product to enhance the above mentioned product?

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod construction w/ 2-56 threads
Nylon clevis construction

CONSISTS OF:
5 steel threaded rods 12" long, thread length 3/4", .072" diameter
5 2-56 nylon clevises 7/8" long

SPECS:
See "Includes" above

COMMENTS:
For bulk qty of 12, use DUBQ1580.

This product praises the main item right here.

12" Rods With St Kwik Link

These are Threaded Rods with Kwik Links.

FEATURES:
Steel construction

CONSISTS OF:
5 steel threaded rods 12" long, thread length 3/4", .072" diameter
5 2-56 steel clevises 1" long

SPECS:
See "Includes" above

COMMENTS:
For bulk qty of 12, utilize DUBQ1550.

You will certainly enjoy this item if you have the item just above discussed.



Created for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Two male bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female connector order GPMM3113

This is a amazing enhancement to the product currently being gone over.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Connector Female from Terrific Planes.

FEATURES:
Gold plated
Fits wire diameter up to 3.5mm

CONSISTS OF:
Two female bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Diameter: .14" (3.5mm) inside (where the wire is soldered to)
Diameter: .17" (4.25mm) outside

COMMENTS:
For the 3.5mm male connector order GPMM3112

The below product additionally sets really well with the product being gone over.



This is a fantastic variety of clevises for connecting your pushrod wires to
servo arms, control horns, throttle arms and bellcranks.

INCLUDES:
Four solder clevises for upto .074" diameter wire
Four 2-56 nylon clevises
Four 2-56 threaded steel clevises
Twelve silicone tube retainers

FUNCTIONS:
Great Planes 1-year guarantee

NEEDS:
2-56 size pushrod
Solder for the solder clevises

This is a amazing enhancement to the product currently being gone over.

E-Z Connector For Rod Or Cable

This is an EZ Connector set by Dubro.
EZ Connectors connect a pushrod to a servo arm enabling it to pivot for
less bind in control surfaces.

FEATURES:
Works on 2-56 and smaller sized wire (.078")
Irreversible or snap on installing push nuts both included.

INCLUDES:
2 brass EZ Connectors
2 plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECS:
Length of brass connector: 10mm (.395")
Diameter of brass connector: 5.5mm (.217")