Dubro T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon building

INCLUDES:
Two control horns w/5 adjusting holes and 2 installing holes
(1-1/8" long [tall])
Two installing plates w/2 installing holes (1/2"x1/2")
Four 2-56x5/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Frequently purchased with the item that you are presently checking out.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
Two control horns w/4 adjusting holes and 2 installing holes
(3/4" long [tall])
Two installing plates w/2 installing holes (3/8"x3/8")
Four 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Want an additional terrific item to match the above mentioned item?

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building w/ 2-56 threads
Nylon clevis building

INCLUDES:
Five steel threaded rods 12" long, thread length 3/4", .072" diameter
Five 2-56 nylon clevises 7/8" long

SPECIFICATIONS:
See "Consists of" above

REMARKS:
For bulk qty of 12, usage DUBQ1580.

This item compliments the main item below.

12" Rods With St Kwik Link

These are Threaded Rods with Kwik Links.

FEATURES:
Steel building

INCLUDES:
Five steel threaded rods 12" long, thread length 3/4", .072" diameter
Five 2-56 steel clevises 1" long

SPECIFICATIONS:
See "Consists of" above

REMARKS:
For bulk qty of 12, use DUBQ1550.

You will certainly enjoy this product if you have the product earlier discussed.



Created for usage with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
3 male bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

REMARKS:
For the 3.5mm female adapter order GPMM3113

This is a superb addition to the item presently being gone over.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for usage with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Port Female from Excellent Planes.

FEATURES:
Gold plated
Fits wire diameter as much as 3.5mm

INCLUDES:
3 female bullet adapters

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .51" (13mm)
Size: .14" (3.5mm) inside (where the wire is soldered to)
Size: .17" (4.25mm) outside

REMARKS:
For the 3.5mm male adapter order GPMM3112

The listed below item also pairs really well with the item being gone over.



This is a great selection of clevises for attaching your pushrod wires to
servo arms, control horns, throttle arms and bellcranks.

INCLUDES:
Four solder clevises for upto .074" diameter wire
Four 2-56 nylon clevises
Four 2-56 threaded steel clevises
Twelve silicone tube retainers

FEATURES:
Great Planes 1-year guarantee

REQUIRES:
2-56 size pushrod
Solder for the solder clevises

This is a superb addition to the item presently being gone over.

E-Z Connector For Rod Or Cable

This is an EZ Port set by Dubro.
EZ Connectors link a pushrod to a servo arm allowing it to pivot for
less bind in control surfaces.

FEATURES:
Functions on 2-56 and smaller sized wire (.078")
Long-term or snap on installing push nuts both included.

INCLUDES:
Two brass EZ Connectors
Two plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECIFICATIONS:
Length of brass adapter: 10mm (.395")
Size of brass adapter: 5.5mm (.217")