Dubro Remote Safety Ignitor Recessed

This is a Remote Safety Ignitor (Remote Glow Ignitor) for In-Cowl Engines.
This supplies an external glow motorist socket that is wired straight
to the real glow plug and grounded to one engine head bolt.

FEATURES:
Created to clip onto glow plugs that are recessed far down into
    the cylinder heads.
Can be utilized on any single cylinder engine.
For use with any vehicle, helicopter, airplane or boat where the glow plug
    remains in a tough to reach area or is close to a propellor.
Dust cover is attached with a pin and rotates left or right, opening
    so glow motorist can be inserted into the recessed socket.
Ignitor socket is made from black plastic.

INCLUDES:
One Pre-Assembled Recessed Remote Safety Ignitor with
    Attached Dust Cover

NEEDS:
Cutting a hole to install external socket.
Cementing the real estate in the hole using CA or epoxy glue.

SPECS:
Mounting Hole For External Socket: 11/16"
Wire Length: 23-1/2"

COMMENTS:
Difference between standard and recessed ignitors:
    "remote safety ignitor" glow plug wire has a loop with another wire
    crossing through it. Looks sort of like this: @
"remote safety ignitor for recessed glo-plugs" glow plug wire has
2 wires in a opposing V shape. Looks sort of like this: ><