Dubro Remote Safety Ignitor Recessed

This is a Remote Safety Ignitor (Remote Radiance Ignitor) for In-Cowl Engines.
This provides an external glow driver socket that is wired directly
to the actual glow plug and grounded to one engine head bolt.

FEATURES:
Created to clip onto glow plugs that are recessed far down into
    the cylinder heads.
Can be used on any single cylinder engine.
For usage with any vehicle, helicopter, aircraft or boat where the glow plug
    remains in a tough to reach area or is close to a propellor.
Dust cover is attached with a pin and turns left or right, opening
    so glow driver can be placed into the recessed socket.
Ignitor socket is made of black plastic.

INCLUDES:
One Pre-Assembled Recessed Remote Safety Ignitor with
    Connected Dust Cover

NEEDS:
Cutting a hole to mount external socket.
Cementing the housing in the hole using CA or epoxy glue.

SPECS:
Installing Hole For External Socket: 11/16"
Wire Length: 23-1/2"

REMARKS:
Distinction between basic and recessed ignitors:
    "remote safety ignitor" glow plug wire has a loop with another wire
    crossing through it. Looks sort of like this: @
"remote safety ignitor for recessed glo-plugs" glow plug wire has
2 wires in a opposing V shape. Looks sort of like this: ><