Dubro Nylon Control Horns Left & Right

These are L-Style Nylon Control Horns.
One Right & One Left Control Horn.

FEATURES:
Nylon building

INCLUDES:
One right control horn w/4 adjusting holes and 2 installing holes *
One left control horn w/4 adjusting holes and 2 installing holes *
*(1-1/8" long [high])
2 installing plates w/2 installing holes (5/8"x1/4")
Four 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

This item compliments the above talked about item.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
2 control horns w/4 adjusting holes and 2 installing holes
(3/4" long [high])
2 installing plates w/2 installing holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

This item is often bought with the above pointed out item.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with devices)

You will like this item if you have the item above mentioned.

900Mm Light Extension Cable (Jr)

HYPERION 900MM LIGHT EXTENSION CABLE (JR)

Below is a excellent item that many others have purchased the exact same time.



The Nylon Hinges are used to connect control surface areas to the airplane, such
as the tracking edge of surface and the leading edge of control surface.

INCLUDES:
6 Medium Pinned Hinges (White)

INCLUDES:
The specifically textured nylon helps quickly setting CAs or epoxy get
    a strong grip for quick long lasting bonds.
It is shaped to guarantee bond strength at (3) crucial points:
    1- At the edges
    2- On the surface areas
    3- Through holes
Unique roughed up plastic material designed to be installed with
    CA or Epoxy. .

MEASUREMENTS:
Aprox. 1"L x 3/4"W.

COMMENTS:
Client will have to acquire the epoxy or CA independently. 4/20/96sk

Want an additional excellent item to compliment the above pointed out item?

E/Z Connector For Rod Or Cable, 12/Pkg

Bulk replacement EZ Connectors by DuBro.

PACKAGE
INCLUDES:
12-EZ Adapters (brass)
12-Retainers (snap onto the bottom of the EZ Connector)
12-Washers (gray metal)
12-Socket Head Screws (assist hold the pushrod wire in place)

INCLUDES:
Brass port is round with pre-drilled center hole
Black nylon retainers

SPECS:
Screws: 1/8"
Washers: 7/32"
7/26/94sk