Dubro Mini Nylon Hinges-6 Pack

These are Small Nylon Hinges

FEATURES:
Nylon construction w/steel hinge pin

INCLUDES:
Six hinges

SPECS:
7/16"x1-1/8" total unfolded length

REMARKS:
Accuracy molded, checked and assembled with locked in hinge pin.
Easy to set up. Hinges have six holes on each side for optimum
holding power.

You will certainly like this item if you have the item earlier mentioned.



This item compliments the main item here.



This item compliments the above gone over item.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon construction

INCLUDES:
2 control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [tall])
2 mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

Regularly purchased with the item that you are presently reviewing.

T-Style Nylon Control Horns 2Pc

These are T-Style Nylon Control Horns.

FEATURES:
Nylon construction

INCLUDES:
2 control horns w/5 adjusting holes and 2 mounting holes
(1-1/8" long [tall])
2 mounting plates w/2 mounting holes (1/2"x1/2")
Four 2-56x5/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

Here is one more item that compliments the item being gone over.

Horn Bracket 4-40 3/32"

These are 3/32" EZ Adjust Horn Brackets for 4-40 Threads

FEATURES:
Nylon construction

INCLUDES:
Four horn brackets

NEEDS:
A rod with 4-40 threads

This item compliments the above gone over item.

Kwik-Hinge Slotter

This is a Hinge Slotter Package from Dubro.

FEATURES:
Takes the inconvenience from slotting control surfaces for gluing hinges.
The centering/parallel guide, centers hinge slotter on as much as 3/4"
    (19mm) material.
Four handle set plus guide and focusing tool for three various
    size slotting forks: mini, basic and heavy task hinges.
Designed to work with all Dubro hinges.
The 3 slotters and the picker are permanently mounted to red nylon
    handles.

INCLUDES:
One Hinge Slotter Package.

Regularly purchased with the item that you are presently reviewing.



This is the Midwest .210" Diameter 40" Carbon Fiber Tube.

FEATURES:
Ideal for slipping over a pushrod to increase strength and rigidity
Constructed using several layers of unidirectional carbon covered
    on a mandrel and cured
40% lighter than aluminum

INCLUDES:
One Midwest .210" Diameter 40" Carbon Fiber Tube

NEEDS:
Cutting (abrasive cut-off wheel suggested) depending upon application

SPECS:
Length: 40" (1016mm)
Outer Diameter: .210" (5.3mm)
Inner Diameter: .132"
Weight: 0.018oz (.520g) per inch

REMARKS:
When cutting carbon fiber, prevent side cutters as these can squash the
    rods and different fibers. Always wear safety goggles and gloves
    when cutting or sanding carbon fiber.

This item is often purchased with the above discussed item.



This is a superb enhancement to the item presently being gone over.



This is a fantastic variety of clevises for attaching your pushrod wires to
servo arms, control horns, throttle arms and bellcranks.

INCLUDES:
Four solder clevises for upto .074" diameter wire
Four 2-56 nylon clevises
Four 2-56 threaded steel clevises
Twelve silicone tube retainers

FEATURES:
Great Planes 1-year warranty

NEEDS:
2-56 size pushrod
Solder for the solder clevises