Dubro 3X8mm Flat Head Socket Screws (4)

These are Countersunk Machine Screws by Dubro.

FEATURES:
Black metal construction

INCLUDES:
Four hex head 3.0x8mm screws

REQUIRES:
2mm hex wrench, GPMR8011

Lots of others have gotten this item together with the item that you are presently reviewing.

Flat Head Socket Screw 3.0mmx6 (4)

This is a package of 4 Dubro Flat Head Hex Screws for general application.

FEATURES:
Black steel construction

INCLUDES:
Four 3x6mm flat head hex screws

REQUIRES:
Tightening up with a 2.0mm allen key

Right here is a fantastic item that lots of others have purchased the same time.

3.0Mmx10 Flat Head Socket Screws, 4/Pkg

These are Countersunk Machine Hex Head Screws by Dubro.

FEATURES:
Black metal construction

INCLUDES:
Four 3.0x10mm screws

REQUIRES:
2mm hex wrench, GPMR8011

You will love this item if you have the item previously stated.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above talked about item.

3.0Mm X 10 Socket Head Cap Screws (4/Pkg)

These are 3x10mm Socket Head Cap Screws.

FEATURES:
Steel construction

INCLUDES:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 10mm
Size: 3mm

This item praises the above talked about item.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel construction

INCLUDES:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 18mm
Size: 3mm

This is a great addition to the item presently being talked about.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel construction

INCLUDES:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 30mm
Size: 3mm

Right here is another item that praises the item being talked about.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Automobile Line (Metric).

FUNCTIONS:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Size: 3mm

Want another fantastic item to match the above stated item?



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite construction

INCLUDES:
One 6x5.5E Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 6"
Pitch: 5.5
Hub inner size: 0.25"

Often gotten with the item that you are presently reviewing.



These are the 4x3x6mm Grey Spacers from Axial
for the Scorpion Rock Crawler.

FEATURES:
Aluminum construction, grey in color

INCLUDES:
6 4x3x6mm spacers

REQUIRES:
Setup

SPECIFICATIONS:
Length: .16" (4mm)
External size: .23" (6mm)
Inner size: .11" (3mm)

Get this item to improve the one you read around.

1400Kv Brushless Outrunner, Long Shaft

PLEASE KEEP IN MIND: Prop adapter not included.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An outstanding motor for planes as much as 220 grams (8 oz) using 2 li-poly cells. Really lightweight at 19 grams consisting of integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall program install. Great for small 3D planes weighing around 6 oz, or aerobatic planes as much as 8 oz. Usage with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm hardened steel shaft, double ball bearings, integral prop saver for APC E props and integral firewall program install flange. Keep in mind that the prop saver is sized for APC props. GWS props will require some modification to fit effectively. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency existing: 2-6 Amp
NoLoad current / 0.3 Amp
Present capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5