Dubro 3X8mm Flat Head Socket Screws (4)

These are Countersunk Maker Screws by Dubro.

FEATURES:
Black metal building and construction

CONSISTS OF:
Four hex head 3.0x8mm screws

REQUIRES:
2mm hex wrench, GPMR8011

Numerous others have purchased this product in addition to the product that you are presently reading about.

Flat Head Socket Screw 3.0mmx6 (4)

This is a bundle of 4 Dubro Flat Head Hex Screws for general application.

FEATURES:
Black steel building and construction

CONSISTS OF:
Four 3x6mm flat head hex screws

REQUIRES:
Tightening up with a 2.0mm allen secret

Below is a fantastic product that numerous others have bought at the very same time.

3.0Mmx10 Flat Head Socket Screws, 4/Pkg

These are Countersunk Maker Hex Head Screws by Dubro.

FEATURES:
Black metal building and construction

CONSISTS OF:
Four 3.0x10mm screws

REQUIRES:
2mm hex wrench, GPMR8011

You will enjoy this product if you have the product earlier pointed out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above discussed product.

3.0Mm X 10 Socket Head Cap Screws (4/Pkg)

These are 3x10mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 10mm
Diameter: 3mm

This product compliments the above discussed product.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 18mm
Diameter: 3mm

This is a amazing addition to the product presently being discussed.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building and construction

CONSISTS OF:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 30mm
Diameter: 3mm

Below is an additional product that compliments the product being discussed.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Diameter: 3mm

Want an additional fantastic product to match the above stated product?



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite building and construction

CONSISTS OF:
One 6x5.5E Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 6"
Pitch: 5.5
Center inner diameter: 0.25"

Often purchased with the product that you are presently reading about.



These are the 4x3x6mm Grey Spacers from Axial
for the Scorpion Rock Crawler.

FEATURES:
Aluminum building and construction, grey in color

CONSISTS OF:
Six 4x3x6mm spacers

REQUIRES:
Installation

SPECIFICATIONS:
Length: .16" (4mm)
Outer diameter: .23" (6mm)
Inner diameter: .11" (3mm)

Get this product to boost the one you read around.

1400Kv Brushless Outrunner, Long Shaft

PLEASE NOTE: Prop adapter not included.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for aircrafts as much as 220 grams (8 oz) using 2 li-poly cells. Extremely lightweight at 19 grams including essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall install. Great for small 3D aircrafts weighing around 6 oz, or aerobatic aircrafts as much as 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm solidified steel shaft, double ball bearings, essential prop saver for APC E props and essential firewall install flange. Note that the prop saver is sized for APC props. GWS props will require some adjustment to fit properly. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance existing: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capability: 7.5 A/60 s
Max. Efficiency: 74%
Weight with cable televisions: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5