Dubro Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
Two control horns w/4 changing holes and 2 mounting holes
(3/4" long [tall])
Two mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

Right here is one more thing that praises the thing being gone over.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with accessories)

You will like this product if you have the product previously discussed.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building

INCLUDES:
Two Connectors
Two Screws
Two Washers

NEEDS:
Nothing

SPECS:
Length: 4.8mm (3/16")
Size: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

COMMENTS:
Optimum pushrod size is .047 - 3/64" (1.22mm)

This thing praises the above gone over thing.

E/Z Connector For Rod Or Cable, 12/Pkg

Bulk replacement EZ Connectors by DuBro.

PACKAGE
INCLUDES:
12-EZ Connectors (brass)
12-Retainers (snap onto the bottom of the EZ Connector)
12-Washers (gray metal)
12-Socket Head Screws (help hold the pushrod wire in location)

FEATURES:
Brass connector is round with pre-drilled center hole
Black nylon retainers

SPECS:
Screws: 1/8"
Washers: 7/32"
7/26/94sk

Want one more wonderful thing to enhance the above pointed out thing?

E-Z Connector For Rod Or Cable

This is an EZ Connector set by Dubro.
EZ Connectors link a pushrod to a servo arm allowing it to pivot for
less bind in control surfaces.

FEATURES:
Functions on 2-56 and smaller sized wire (.078")
Permanent or snap on mounting push nuts both included.

INCLUDES:
Two brass EZ Connectors
Two plastic snap nuts.
Two metal snap nuts.
Two 2.5x3.5mm slotted head screws.

REQUIRES:
Assembly onto linkages

SPECS:
Length of brass connector: 10mm (.395")
Size of brass connector: 5.5mm (.217")

Several others have bought this thing along with the thing that you are currently reviewing.

Mini-Ny Steel Pushrod Assembly

This is a Lightweight pushrod assembly suitable for 1/2A applications. The
assembly consists of a plastic external tube, steel pushrods, plastic clevis'
and spring threads.

Includes: 2- steel pushrods
2- plastic pushrod covers
4- little plastic clevis'
4- steel spring threads (these are soldered to the wire as threads)

Specs: Rod length 19" rod size 1/32"
Plastic tube 16" tube inner dia. 1/16" external dia.1/8"

Right here is one more thing that praises the thing being gone over.

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building w/ 2-56 threads
Nylon clevis building

INCLUDES:
5 steel threaded rods 12" long, thread length 3/4", .072" size
5 2-56 nylon clevises 7/8" long

SPECS:
See "Consists of" above

COMMENTS:
For bulk qty of 12, use DUBQ1580.