Dubro 3Mm Steel Hex Nuts-Metric

    These are 3mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are designed for use on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 3.0mm

This is a great enhancement to the product currently being discussed.

3.0Mm X 6 Socket Head Cap Screws (4/Pkg)

These are 3x6mm Socket Head Cap Screws

FEATURES:
Steel building

INCLUDES:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 6mm
Diameter: 3mm

You will love this thing if you have the thing just above pointed out.

3.0Mm X 30 Socket Head Cap Screws (4/Pkg)

These are 3x30mm Socket Head Cap Screws.

FEATURES:
Steel building

INCLUDES:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 30mm
Diameter: 3mm

This product compliments the above discussed product.

3.0Mm X 18 Socket Head Cap Screws (4/Pkg)

These are 3x18mm Socket Head Cap Screws.

FEATURES:
Steel building

INCLUDES:
Four screws

REQUIRES:
2.5mm allen wrench

SPECIFICATIONS:
Length: 18mm
Diameter: 3mm

This product is often acquired with the above stated product.

3.0Mm X 50 Socket Head Cap Screws, 4/Pkg

This is a plan of 4 Dubro Socket Head Cap Screws for basic application.

FEATURES:
Black steel building

INCLUDES:
Four 3x50mm socket head cap screws

REQUIRES:
Tightening with a 2.5mm allen key

Below is a terrific product that several others have bought at the very same time.

3Mm Nylon Insert Lock Nuts Metric

These are 3mm Nylon Insert Lock Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated metal construction.
Clear nylon insert.
Aircraft quality lock nuts.

INCLUDES:
(4) Lock Nuts

SPECIFICATIONS:
Diameter: 3mm

Get this product to enhance the one you are reading about.

2Mm Steel Hex Nuts-Metric

    These are 2mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 2.0mm

Get this product to enhance the one you are reading about.

Prop Adapter with Collet, 3mm


Tech Notes


Use on motors with 3mm size output shafts.
Collet threads are 4.5mm in size.











Below is a terrific product that several others have bought at the very same time.

11x6 Sport Propeller

This is a 11x6 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building lowers turning mass for
    greater output and longer life.
Reinforcing carbon fibers assist keep real, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props need balancing, this is EXTREMELY IMPORTANT, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" represent the production run in which this prop was made.

Get this product to enhance the one you are reading about.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One guideline sheet

REQUIRES:
Assembly onto motor or equipment drive unit in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Center inner size: 0.25"

COMMENTS:
Use Speed 400 Electric motors.