Dubro 2.5Mm X 8 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for areas where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
can be found in a variety of diameters and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

Want another great item to match the above discussed item?

2.5Mm X 6 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for areas where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
can be found in a variety of diameters and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

Get this item to enhance the one you read around.

2.5Mm X 15 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for areas where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
can be found in a variety of diameters and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

This item praises the above talked about item.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Automobile Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECS:
Diameter: 2.5mm

This is a amazing enhancement to the item presently being talked about.



Safeguard soft wood from "pull-through" screws and your hardware from rust with
Excellent Aircrafts' Zinc-plated washers. The washers feature a large area
that spreads holding power to more material, letting you tighten screws down
without harming the surface underneath. The special Zinc plating keeps them
rust and corrosion-free, for easy setup and removal.

INCLUDES:
8 #2 Flat Washers and comes in a reusable plastic parts load

SPECS:
Inside Diameter: .095" (2.4mm)
Outside Diameter: .220" (5.5mm)

Often gotten with the item that you are presently reading about.



The Top Flite balancer is an innovative method to balance your airplane or boat
propellers, spinner backplates, automobile wheels and tires, along with numerous other
items in the hobby industry.

FEATURES:
Precision ground stabilizing shaft, held in between two powerful
    "Ceramic 8" magnets enables shaft to "drift" for maximum level of sensitivity
Inexpensive and easy to utilize...vital for each modeler.
Reduces prop vibration-reducing engine wear and prevents
    structural damage
Can be utilized anywhere-on the workbench or at the field
Constructed of long-lasting, high impact plastic and Nickel steel
Suches as guidelines discussing how to remedy out-of-balance props,
    and even how to utilize the balancer to identify wind speed.
Can also be utilized to balance boat props, automobile wheels and tires,
    ducted fans, spinners, nose weights and more!
Balances approximately 24" propellers and any size wheels and tires.

INCLUDES:
Two Ceramic Magnets (GP# METAL058)
Two Molded Plastic Side Plates (GP# NYLON92)
Two Metal Rods for Base Assistance (GP# WIRES81)
One Balancing Shaft (TOPQ5701) or (GP# WIRES80)
Two Plastic Propeller Locking Cones (TOPQ5702)
Two Lexan Magnet Covers (GP# PSDC001)
Two Thumb Screws (GP# SCRW102) .

NEEDS:
CA to glue Lexan magnet covers to magnets.

SPECS:
Carry size: 2-1/8" x 7-1/8" x 1-5/16"
Assembled size: 2-1/8" x 7-1/8" x 7-3/8"

COMMENTS:
Balancer is VERY sensitive, VERY precise.