Dubro 1.86" Micro Sport Wheels

This is a set of 2 Du-Bro 1.86" Micro Sport Wheels.

FEATURES:
Light-weight foam building and construction
Pre-mounted on 5-spoke white plastic wheels

SUCHES AS:
2 1.86" (47mm) Micro Sport Wheels

REQUIRES:
Assembly on vehicle.

SPECS:
Tire Size: 47mm (1.85")
Tire Width: 8mm (.31")
Hole Size: 2mm

Often purchased with the product that you are currently checking out.

2.50" Micro Sport Wheels, 2/Pkg

This is a set of 2.5" Size Micro Sport Wheels from Du-Bro.

FUNCTIONS:
Created for indoor and park flyer models
White Nylon, Open 5-spoke design includes a stylish look to your model
Pre-mounted smooth foam tires

SUCHES AS:
2 2.5" Size Micro Sport Wheels

REQUIRES:
Installation

SPECS:
Size: 2.5" (63mm)
Width: .40" (10mm)
Axle Hole Size: .078" (2mm)
Weight: 6.9 grams (each wheel)

This product praises the main item right here.



Created for usage with 3 wire Brushless motor systems, this is
    the 2mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

SUCHES AS:
Three male bullet ports

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .59" (15mm)
Size: .079" (2mm) outside

COMMENTS:
For the 2mm female port order GPMM3111

The listed below product additionally sets truly well with the product being talked about.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for usage with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Port Female from Excellent Planes.

FEATURES:
Gold plated
Fits wire size up to 3.5mm

SUCHES AS:
Three female bullet ports

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Size: .14" (3.5mm) inside (where the wire is soldered to)
Size: .17" (4.25mm) outside

COMMENTS:
For the 3.5mm male port order GPMM3112

Get this product to improve the one you are reading about.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also known as a JST connector.

FEATURES:
Created for usage with the majority of Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

SUCHES AS:
2 Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male ports with wire, usage GPMM3106.
This port can be used to change BEC-type ports.

The listed below product additionally sets truly well with the product being talked about.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building and construction

SUCHES AS:
2 control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [tall])
2 mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

This is a fantastic enhancement to the product currently being talked about.

EC3 Device Connector (2)

Specifications
Battery/Charger Accessories: Ports
Connector Type: EC3

Often purchased with the product that you are currently checking out.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)