Dubro 1.86" Micro Sport Wheels

This is a set of Two Du-Bro 1.86" Micro Sport Wheels.

FEATURES:
Light-weight foam building
Pre-mounted on 5-spoke white plastic wheels

INCLUDES:
Two 1.86" (47mm) Micro Sport Wheels

NEEDS:
Assembly on vehicle.

SPECS:
Tire Diameter: 47mm (1.85")
Tire Width: 8mm (.31")
Hole Diameter: 2mm

Often purchased with the item that you are currently checking out.

2.50" Micro Sport Wheels, 2/Pkg

This is a pair of 2.5" Diameter Micro Sport Wheels from Du-Bro.

FEATURES:
Created for indoor and park leaflet models
White Nylon, Open 5-spoke design includes a stylish want to your model
Pre-mounted smooth foam tires

INCLUDES:
Two 2.5" Diameter Micro Sport Wheels

NEEDS:
Installation

SPECS:
Diameter: 2.5" (63mm)
Width: .40" (10mm)
Axle Hole Diameter: .078" (2mm)
Weight: 6.9 grams (each wheel)

This item praises the main item right here.



Created for use with 3 wire Brushless motor systems, this is
    the 2mm Gold Bullet Adapter Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
Three male bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .59" (15mm)
Diameter: .079" (2mm) outside

COMMENTS:
For the 2mm female adapter order GPMM3111

The below item also sets truly well with the item being talked about.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Adapter Female from Terrific Planes.

FEATURES:
Gold plated
Fits wire diameter approximately 3.5mm

INCLUDES:
Three female bullet adapters

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Diameter: .14" (3.5mm) inside (where the wire is soldered to)
Diameter: .17" (4.25mm) outside

COMMENTS:
For the 3.5mm male adapter order GPMM3112

Get this item to enhance the one you read around.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is likewise understood as a JST connector.

FEATURES:
Created for use with the majority of Park Leaflet ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

INCLUDES:
Two Female 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male adapters with wire, use GPMM3106.
This adapter can be utilized to change BEC-type adapters.

The below item also sets truly well with the item being talked about.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
Two control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
Two installing plates w/2 installing holes (3/8"x3/8")
Four 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECS:
See "includes" above

This is a wonderful enhancement to the item currently being talked about.

EC3 Device Connector (2)

Specifications
Battery/Charger Add-on: Adapters
Connector Type: EC3

Often purchased with the item that you are currently checking out.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Requirements:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)