Dromida Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
2 Lower Suspension Arms

The listed below thing also sets truly well with the thing being discussed.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
Four Dogbones

You will love this thing if you have the thing above stated.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
2 Front and two Rear Inner Hinge Pins

Numerous others have actually bought this thing along with the thing that you are presently checking out.

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
Four O-Rings
    Four Springs, vital #35

Want one more terrific thing to compliment the above mentioned thing?

Hinge Pin Holder Set BX MT SC 4.18 (2)

This is the Hinge Pin Holder Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
One Front and one Back Hinge Pin Holder
2 2x14mm Flat Head Screws
2 2x10mm Flat head Screws

This thing is regularly bought with the above mentioned thing.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
10 Body Clips

The listed below thing also sets truly well with the thing being discussed.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to front and rear uprights

CONSISTS OF:
2 Front and two Rear Outer Hinge Pins

This thing praises the above discussed thing.

Shock Long BX MT SC 4.18 (2)

This is a set of Long Shocks for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic bodies
Put together and all set to set up

CONSISTS OF:
2 Long Shocks
2 each 1mm, 2mm and 4mm Preload Spacers
2 Spring Clamps

This is a fantastic addition to the thing presently being discussed.



This is the Front Bumper for the Dromida DB4.18 Desert Buggy.

FEATURES:
Constructed of plastic and aluminum

CONSISTS OF:
Bumper Assembly with Aluminum Plate
Mounting Hardware

Right here is a terrific thing that many others have actually bought at the exact same time.

Wheel Axle Set BX MT SC 4.18 (4)

This is the Wheel Axle Set for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Four Axles
Four 2.5mm O-Rings

This thing praises the above discussed thing.

Linkage Set BX MT SC 4.18

This is the Linkage Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic and metal building

CONSISTS OF:
2 Plastic Tie Rods
Steering Rod with Ball Cups
Four Metal Camber Rods with eight Long Ball Cups

This thing praises the above discussed thing.



This is the Servo for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Replaces worn or broken steering servos
Water resistant under normal operating conditions

CONSISTS OF:
Steering Servo with Wire Lead and Port

SPECS:
Dimensions: 0.94 x 0.85 x 0.46" (24 x 21.5 x 11.8mm)
Weight: 0.39oz (11g)
Specifications such as speed and torque not offered by manufacturer