Dromida Screw/Hardware Set BX MT SC 4.18

This is the Screw and Hardware set for the Dromida SC4.18, MT4.18,
and BX4.18 Vehicles.

FEATURES:
Steel building
Sizes separately packaged

CONSISTS OF:
All Screws, Locknuts, E-Clips, Washers, Set Screw and Body Clips
    utilized in the assembly of the Dromida vehicles

Here is a wonderful product that numerous others have bought at the exact same time.

Suspension Arm Lower BX MT SC 4.18 (2)

These are the Lower Suspension Arms for the Dromida SC, MT and BX Vehicles.

FEATURES:
Plastic building
Fits front or rear suspension

CONSISTS OF:
Two Lower Suspension Arms

This product praises the above talked about product.



This is the 2.4GHz V2 2in1 Receiver/ESC and Steering Servo
for the Dromida SC, MT and BX Vehicles.

FEATURES:
One self consisted of unit with pre-installed steering servo
Additional adapter for new Dromida vehicles with LED lights

CONSISTS OF:
Combination Receiver/ESC with Battery and Motor Connectors
Steering Servo, DIDM1001

Want one more wonderful product to enhance the above mentioned product?

Steering Bellcrank Assembly BX MT SC 4.18

This is the Steering Bellcrank Assembly
for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building

CONSISTS OF:
Drag Link
One Right and one Left Steering Bellcrank
Two 2x8mm Round Head Shoulder Screws

REMARKS:
The 2 Ballstuds displayed in the parts list of the handbook are not
    consisted of. Order DIDC1034 if these ballstuds are required.

Here is one more product that praises the product being talked about.



You will like this thing if you have the thing previously discussed.

Dogbone Set BX MT SC 4.18 (4)

This is the Dogbone Set for the Dromida BX, MT, and SC Vehicles.

FEATURES:
Plastic building with steel pins
Fits front and rear drive systems

CONSISTS OF:
4 Dogbones

This product praises the above talked about product.

Hub Carrier Front BX MT SC 4.18 (2)

Want one more wonderful product to enhance the above mentioned product?

Drive Shaft Spacer Set BX MT SC 4.18

This is the Drive Shaft Spacer Set
for the Dromida SC4.18, MT4.18 and BX4.18 Vehicles.

FEATURES:
Installs on either side of put together differential

CONSISTS OF:
4 O-Rings
    4 Springs, essential #35

Many others have bought this product in addition to the product that you are currently reviewing.

Body Clip BX MT SC 4.18 (10)

These are the Body Clips for the Dromida SC, MT and BX Vehicles.

FEATURES:
Steel building

CONSISTS OF:
10 Body Clips

Here is one more product that praises the product being talked about.

Hinge Pin 2x36.5mm BX MT SC 4.18 (4)

These are the 2x36.5mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to chassis

CONSISTS OF:
Two Front and 2 Rear Inner Hinge Pins

This product is frequently bought with the above mentioned product.

Hinge Pin 2x22mm BX MT SC 4.18 (4)

These are the 2x22mm Hinge Pins for the Dromida SC, MT and BX Vehicles.

FEATURES:
Metal building
Fastens A-Arms to front and rear uprights

CONSISTS OF:
Two Front and 2 Rear Outer Hinge Pins