Dromida Bearing Set Ominus/Ominus FPV Quadcopter

This is the Bearing Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Installs on each motor shaft at bottom of primary frame, and in between
    primary frame and motor gear

CONSISTS OF:
8 3x6x2mm Ball Bearings, key #3

This thing compliments the main item below.

Main Gear Shaft Ominus Quadcopter

These are the Main Gear Shafts for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Aluminum construction
Transfers power from the motor to the primary gear set and propellers
    housed in the primary frame

CONSISTS OF:
4 Main Gear Shafts, key #5

Here is one more thing that compliments the thing being gone over.



This is the Gear Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic construction
Installs in primary frame and connects to propellers and primary gear
    shafts

CONSISTS OF:
4 Gears, key #4

The below thing also sets truly well with the thing being gone over.



This is the Screw Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Steel construction with black and silver surface
All screws needed to install propellers, motors and battery frame

CONSISTS OF:
Screw Set, key #13

Here is one more thing that compliments the thing being gone over.

Motor Cover Ominus Quadcopter

These are the Motor Covers for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic construction
Holds motor in place on bottom of primary frame

CONSISTS OF:
4 Motor Covers key #8

Numerous others have gotten this thing in addition to the thing that you are presently reviewing.

Main Motor Clock-wise Left/Front Right/Rear Ominus/FPV

This is the Left Front/Right Back Clockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Left Front/Right Back Clockwise Rotating Motor with
Pinion Gear and Wire Lead with Connector

CONSISTS OF:
Left Front/Right Back Clockwise Rotating Motor, key #9

COMMENTS:
Not interchangeable with other positions. For the Right Front/
Left Back Counterclockwise Rotating Motor, order DIDE1131

This thing compliments the main item below.



This is the Right Front/Left Back Counterclockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Right Front/Left Back Counterclockwise Rotating Motor
with Pinion Gear and Wire Lead with Connector

CONSISTS OF:
Right Front/Left Back Counterclockwise Rotating Motor, key #10

COMMENTS:
Not interchangeable with other positions. For the Left Front/
Right Back Clockwise Rotating Motor, order DIDE1130.

You will enjoy this item if you have the item above mentioned.

LED E-Board O-Rings Ominus/Ominus FPV Quadcopter

These are the LED O-Rings for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Rubber construction
Installs around and seals each LED on the E-board

CONSISTS OF:
4 O-Rings, key #14

Get this thing to enhance the one you read around.

Main Frame Blue Ominus Quadcopter

This is the Main Frame in Blue
    for the Blue and Black Ominus Quadcopter DIDE01BB.

FEATURES:
Molded one-piece plastic construction
Black in color with blue accents

CONSISTS OF:
Main Frame, key #6

Want one more fantastic thing to compliment the above pointed out thing?



This is the Canopy for the Blue and Black Dromida Ominus Quadcopter DIDE01BB.

FEATURES:
Plastic construction
Ominus logo design on top and blue accents on both sides

CONSISTS OF:
Canopy, key #1

Regularly gotten with the thing that you are presently reviewing.



This is the 3.7V LiPo Battery for the Ominus Quadcopter from Dromida.
**Will NOT operate in the Ominus FPV.**

FUNCTIONS:
Stock replacement battery for the Dromida Ominus, DIDE01**

CONSISTS OF:
3.7V LiPo Battery with Wire Lead and 2-Pin Connector

NEEDS:
USB Battery charger, DIDP1120

SPECS:
Voltage Score: 3.7V
mAh Score: 700
Discharge Rate: 25C
Power Score: 2.6Wh