Dromida Bearing Set Ominus/Ominus FPV Quadcopter

This is the Bearing Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Installs on each motor shaft at bottom of main frame, and between
    main frame and motor gear

CONSISTS OF:
8 3x6x2mm Ball Bearings, essential #3

This thing compliments the main item right here.

Main Gear Shaft Ominus Quadcopter

These are the Main Gear Shafts for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Aluminum building
Transfers power from the motor to the main gear set and propellers
    housed in the main frame

CONSISTS OF:
Four Main Gear Shafts, essential #5

Below is one more thing that compliments the thing being discussed.



This is the Gear Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic building
Installs in main frame and links to propellers and main gear
    shafts

CONSISTS OF:
Four Gears, essential #4

The below thing also sets really well with the thing being discussed.



This is the Screw Set for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Steel building with black and silver surface
All screws needed to install propellers, motors and battery frame

CONSISTS OF:
Screw Set, essential #13

Below is one more thing that compliments the thing being discussed.

Motor Cover Ominus Quadcopter

These are the Motor Covers for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Plastic building
Holds motor in place on bottom of main frame

CONSISTS OF:
Four Motor Covers essential #8

Several others have actually bought this thing together with the thing that you are presently reading about.

Main Motor Clock-wise Left/Front Right/Rear Ominus/FPV

This is the Left Front/Right Back Clockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Left Front/Right Back Clockwise Rotating Motor with
Pinion Gear and Wire Lead with Port

CONSISTS OF:
Left Front/Right Back Clockwise Rotating Motor, essential #9

COMMENTS:
Not interchangeable with other positions. For the Right Front/
Left Back Counterclockwise Rotating Motor, order DIDE1131

This thing compliments the main item right here.



This is the Right Front/Left Back Counterclockwise Rotating Motor
for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Replacement Right Front/Left Back Counterclockwise Rotating Motor
with Pinion Gear and Wire Lead with Port

CONSISTS OF:
Right Front/Left Back Counterclockwise Rotating Motor, essential #10

COMMENTS:
Not interchangeable with other positions. For the Left Front/
Right Back Clockwise Rotating Motor, order DIDE1130.

You will certainly like this thing if you have the thing above pointed out.

LED E-Board O-Rings Ominus/Ominus FPV Quadcopter

These are the LED O-Rings for the Dromida Ominus Quadcopter DIDE01**.

FUNCTIONS:
Rubber building
Installs around and seals each LED on the E-board

CONSISTS OF:
Four O-Rings, essential #14

Get this thing to boost the one you read about.

Main Frame Blue Ominus Quadcopter

This is the Main Frame in Blue
    for the Blue and Black Ominus Quadcopter DIDE01BB.

FEATURES:
Formed one-piece plastic building
Black in color with blue accents

CONSISTS OF:
Main Frame, essential #6

Want one more excellent thing to match the above mentioned thing?



This is the Canopy for the Blue and Black Dromida Ominus Quadcopter DIDE01BB.

FEATURES:
Plastic building
Ominus logo design on the top and blue accents on both sides

CONSISTS OF:
Canopy, essential #1

Often bought with the thing that you are presently reading about.



This is the 3.7V LiPo Battery for the Ominus Quadcopter from Dromida.
**Will NOT operate in the Ominus FPV.**

FUNCTIONS:
Stock replacement battery for the Dromida Ominus, DIDE01**

CONSISTS OF:
3.7V LiPo Battery with Wire Lead and 2-Pin Port

REQUIRES:
USB Battery charger, DIDP1120

SPECS:
Voltage Rating: 3.7V
mAh Rating: 700
Discharge Rate: 25C
Power Rating: 2.6Wh