Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides protected connnection for light task applications such as mini
    vehicles and Park Flyers.

INCLUDES:
2 plugs with shrink wrap

NEEDS:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This thing is often bought with the above pointed out thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of small Red heat-shrinkable tubing
2 pieces of small Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
General length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

REMARKS:
The port is NOT suitable with small White
    Futaba transmitter battery connectors.

The listed below thing additionally sets really well with the thing being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise called a JST connector.

FEATURES:
Designed for usage with many Park Leaflet ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality guarantee

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, usage GPMM3107
This port can be used to change BEC-type connectors.

This thing praises the main item below.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Light-weight
Enables current to move extremely quickly
Allows for more power

CONSISTS OF:
2 2B Micro Plugs with four areas of shrink wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly bought with the thing that you are presently reading about.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing enables all cells to totally Credit 4.2V ensuring
    maximum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or an effectively equipped Charger
    with Stabilizing Abilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Instruction Sheet

NEEDS:
2S 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioner and DC Adapters
    (GPMM3321), or with Balancing Charger with Vehicle Adapter just
    (GPMM3322)

SPECS:
Capability: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Optimum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
READ the ENTIRE guideline sheet consisted of with battery before usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER take apart or modify pack wiring in any method or puncture cells
NEVER place on combustible products or leave unattended throughout
    Charging
ALWAYS charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children