Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light responsibility applications such as mini
    cars and Park Flyers.

INCLUDES:
2 plugs with diminish wrap

REQUIRES:
Soldering leads onto the ports

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This thing is regularly acquired with the above pointed out thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The adapter is NOT compatible with little White
    Futaba transmitter battery ports.

The listed below thing also sets really well with the thing being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Designed for usage with the majority of Park Leaflet ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality assurance

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, usage GPMM3107
This adapter can be utilized to change BEC-type ports.

This thing compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Light-weight
Allows existing to move really quickly
Permits more power

CONSISTS OF:
2 2B Micro Plugs with 4 areas of diminish wrap

REQUIRES:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Frequently acquired with the thing that you are currently checking out.



This is the Excellent Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to fully Charge to 4.2V ensuring
    optimum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or a properly geared up Charger
    with Balancing Capabilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Guideline Sheet

REQUIRES:
TWO 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Charger with Vehicle Adapter only
    (GPMM3322)

SPECIFICATIONS:
Capability: 250mAh
Number of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Optimum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
CHECK OUT the ENTIRE instruction sheet included with battery before usage
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or customize pack electrical wiring in any method or leak cells
NEVER put on flammable materials or leave ignored during
    Charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children