Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides protected connnection for light task applications such as mini
    automobiles and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

NEEDS:
Soldering leads onto the ports

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This thing is often acquired with the above discussed thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic connector body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male connector (pins on both sides)
One male-female connector (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECS:
Total length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 locations: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The connector is NOT suitable with little White
    Futaba transmitter battery ports.

The listed below thing additionally sets actually well with the thing being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Developed for usage with most Park Flyer ElectriFly electronic devices
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female ports with wire, usage GPMM3107
This connector can be used to change BEC-type ports.

This thing praises the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors provide less resistance
Light-weight
Permits current to move really quickly
Allows for more power

CONSISTS OF:
Two 2B Micro Plugs with 4 areas of diminish wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Frequently acquired with the thing that you are presently reading about.



This is the Fantastic Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to fully Credit 4.2V guaranteeing
    maximum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or an effectively geared up Charger
    with Balancing Capabilities is used

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Direction Sheet

NEEDS:
TWO 7.4V AC/DC Micro LiPo Balancing Charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Charger with Car Adapter only
    (GPMM3322)

SPECS:
Capability: 250mAh
Number of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE instruction sheet included with battery prior to usage
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER disassemble or modify pack circuitry in any way or puncture cells
NEVER place on combustible materials or leave unattended throughout
    Charging
ALWAYS charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of children