Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
2 plugs with shrink wrap

NEEDS:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This item is regularly gotten with the above discussed item.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male port (pins on both sides)
One male-female port (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
General length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six places: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

REMARKS:
The port is NOT compatible with little White
    Futaba transmitter battery connectors.

The below item additionally sets actually well with the item being reviewed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Created for use with the majority of Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

INCLUDES:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, use GPMM3107
This port can be used to replace BEC-type connectors.

This item compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors offer less resistance
Lightweight
Allows current to move really quickly
Allows for more power

INCLUDES:
2 2B Micro Plugs with four sections of shrink wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Often gotten with the item that you are currently reading about.



This is the Fantastic Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to totally Credit 4.2V guaranteeing
    maximum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or a properly equipped Charger
    with Stabilizing Abilities is used

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Direction Sheet

NEEDS:
TWO 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Charger with Car Adapter just
    (GPMM3322)

SPECS:
Capacity: 250mAh
Number of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE instruction sheet consisted of with battery before use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or leak cells
NEVER put on flammable materials or leave unattended throughout
    Charging
ALWAYS charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids