Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with shrink wrap

REQUIRES:
Soldering leads onto the ports

SPECS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This product is often gotten with the above pointed out product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering gun

SPECS:
Total length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 locations: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

COMMENTS:
The adapter is NOT compatible with little White
    Futaba transmitter battery ports.

The below product additionally sets actually well with the product being reviewed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Developed for use with many Park Flyer ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

INCLUDES:
Two Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, use GPMM3107
This adapter can be utilized to replace BEC-type ports.

This product praises the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors provide less resistance
Lightweight
Allows current to move very fast
Allows for more power

INCLUDES:
Two 2B Micro Plugs with 4 areas of shrink wrap

REQUIRES:
Soldering wires to plugs, can use HCAR0775-soldering iron

Often gotten with the product that you are currently reviewing.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to completely Charge to 4.2V guaranteeing
    optimum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or an effectively geared up Charger
    with Stabilizing Capabilities is utilized

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Instruction Sheet

REQUIRES:
TWO 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Charger with Car Adapter only
    (GPMM3322)

SPECS:
Capacity: 250mAh
Variety of Cells in Series: 2
Rated Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Maximum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
READ the ENTIRE instruction sheet included with battery before use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER disassemble or customize pack electrical wiring in any way or puncture cells
NEVER place on flammable products or leave unattended during
    Charging
ALWAYS charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children